J-B Weld WaterWeld™ 8277 Epoxy Putty, 2 oz, Off-White
WaterWeld™ will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks, setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld™ has a set time of 15 to 25 min and sets hard in one hour. WaterWeld™ cures to an off white color, is rated at a tensile strength of 900 psi and will withstand temperatures up to 300 deg F.
-
BrandJ-B Weld
-
UPC043425082770
-
Manufacturer Part Number8277
-
CountryUSA
-
Tensile Strength900 psi
-
Flash Point93 deg C
-
ColorOff-White
-
CompositionBisphenol A Epichlorhydrin, Titanium-Dioxide, Phenol, Crystalline Silica Non-Respirable
-
Container Size2 oz
-
Applicable MaterialsAutomotive, Ceramic, Epoxy Putty Sticks, Fiberglass, Metal, Plastic/Composite/PVC and Under Water/Wet
-
Curing Time1 hr
-
Setting Time25 min
-
Odor/ScentPungent Sulfurous
-
UNSPSC31201605
Recently Viewed
WaterWeld™ will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks, setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld™ has a set time of 15 to 25 min and sets hard in one hour. WaterWeld™ cures to an off white color, is rated at a tensile strength of 900 psi and will withstand temperatures up to 300 deg F.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
5/16" X 1-1/2" WOODRUFF KEY-MED1035 >
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Sealmaster 2-1/2"-ID 4-BOLT TRB FLANGE UNITS SEA RFB-208
Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive Type E bearings. The exclusive features include unitized replaceable inserts, self aligning capability, split housing and the Sealmaster® alignment pin which provides for a direct path for lubrication into the bearing and helps prevent outer ring rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric with a wide variety of housing, sealing and lubrication options as illustrated on the pages to follow.

