Oatey® 31014 Low VOC Regular Body PVC Cement, 16 oz Container, Clear, For Use With PVC Pipe
Oatey® PVC Regular Bodied Fast Set Clear Cement is recommended for DWV, pressure pipe, potable water and electrical applications. It is easy to apply with included in-lid dauber and its clear color provides a clean finish. This regular bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 4 in. for Schedule 40 and up to 2 in. for Schedule 80 with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
-
BrandOatey®
-
UPC038753310145
-
Manufacturer Part Number31014
-
CountryUSA
-
Temperature Rating40 to 110 deg F
-
ColorClear
-
TypeLow VOC Regular Body
-
CompositionMethyl Ethyl Ketone, Cyclohexanone, Furan, Tetrahydro, Acetone, Polyvinyl Chloride
-
Container Size16 oz
-
Curing Time2 hr
-
Setting Time6 to 7 min
-
Odor/ScentSolvent
-
Suitable For Use WithPVC Pipe
- Clear color provides a clean finish
- Can be used on all schedules and classes of PVC pipe and fittings up to 4 in for Schedule 40 and up to 2 in for Schedule 80 with interference fit
- Recommended application temperature of 40F to 110F / 4C to 43C
- Minimum 90 cps at 73 deg F +/- 2 deg F viscosity
- 6 to 7 min at 30 to 50 deg F/4 to 5 min at 50 to 70 deg F/1 to 3 min at 70 to 90 deg setting
- Clear color provides a clean finish
-
Alternative Part Number310145
-
UNSPSC31201617
-
Package Description24/CTN
-
Standards/ApprovalsASTM D2564|IAPMO Listed|NSF 61 for PW|DWV and Sewer Waste|BAAQMD Method 40|CARB Compliant|IAPMO File No. 1912|Massachusetts Compliant|OTC Compliant|SCAQMD 1168/316A|UL Greenguard Gold|UPC Listed
-
Warranty1 Year Limited
-
Warranty Information
-
Catalog
-
Specification Sheet
Recently Viewed
Oatey® 31014 Low VOC Regular Body PVC Cement, 16 oz Container, Clear, For Use With PVC Pipe
Oatey® PVC Regular Bodied Fast Set Clear Cement is recommended for DWV, pressure pipe, potable water and electrical applications. It is easy to apply with included in-lid dauber and its clear color provides a clean finish. This regular bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 4 in. for Schedule 40 and up to 2 in. for Schedule 80 with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
METRIC TAPERED ROLLER BEARING SETS -KOY32012JR >
16/3-SJT ORANGE ELECTRICAL CORD (BY THE ROLL)-ECI20306250 >
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP1440-8MGT-85 9232 Synchronous Belt, 180 Teeth, 8 mm Pitch, 1440 mm OAL, 85 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
Crosby® 1032830 HG-228-1 X 18 Turnbuckle, Jaw/Jaw, 1 in Thread, 10000 lb Working, 18 in Take Up, 33.18 in L Close, Steel
Crosby® 1032830 HG-228 Turnbuckle, Jaw/Jaw, 1 in Thread, 10000 lb Working, 18 in Take Up, 33.18 in L Close, Steel
