Oatey® 31128 Low VOC Medium Body CPVC Cement, 4 oz Container, Orange, For Use With Upto 6 in Dia CPVC Pipe and Fittings
Oatey® CPVC Medium Bodied Fast Set Orange Cement is recommended for cold water systems and hot water systems up to 200°F / 93°C. It is approved for Corzan® CPVC piping systems. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This orange, low VOC, fast set cement can be used to solvent weld all schedules and classes of CPVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
-
BrandOatey®
-
UPC038753311289
-
Manufacturer Part Number31128
-
CountryUSA
-
Temperature Rating40 to 110 deg F
-
ColorOrange
-
TypeLow VOC Medium Body
-
CompositionFuran, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Chlorinated, Acetone, Cyclohexanone, Silica, Amorphous, Fumed
-
Container Size4 oz
-
Curing Time2 hr
-
Setting Time4 to 5 min
-
Odor/ScentSolvent
-
Suitable For Use WithUpto 6 in Dia CPVC Pipe and Fittings
- Medium bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6 in diameter with interference fit
- Low VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements
- Approved for Corzan® CPVC piping systems
- Corzan® is a registered trademark of the Lubrizol Corporation
- 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting
- Minimum 500 cps at 73 deg F +/- 2 deg F viscosity
- 7.99 +/- 0.2 lbs./gallon density
- Orange cement solvent welds CPVC
- Medium viscosity easily fills gaps and provides more working time
- Medium viscosity easily fills gaps and provides more working time
- Can be used on all schedules and classes of CPVC pipe and fittings up to 6 in. diameter with interference fit
- Approved for use with Corzan® CPVC piping systems (registered trademark of Lubrizol Corporation)
- Recommended application temperature of 40°F to 110°F / 4°C to 43°C
-
Alternative Part Number311285
-
UNSPSC31201617
-
Package Description24/CTN
-
Standards/ApprovalsASTM F493|ASTM D2846|IAPMO Listed|NSF 61 for PW|DWV and Sewer Waste|BAAQMD Method 40|CARB Compliant|IAPMO File No. 4167|Massachusetts Compliant|OTC Compliant|SCAQMD 1168/316A|UL Greenguard Gold
-
Warranty1 Year Limited
-
SDS
-
Warranty Information
-
Catalog
-
Specification Sheet
Recently Viewed
Oatey® 31128 Low VOC Medium Body CPVC Cement, 4 oz Container, Orange, For Use With Upto 6 in Dia CPVC Pipe and Fittings
Oatey® CPVC Medium Bodied Fast Set Orange Cement is recommended for cold water systems and hot water systems up to 200°F / 93°C. It is approved for Corzan® CPVC piping systems. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This orange, low VOC, fast set cement can be used to solvent weld all schedules and classes of CPVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
PREMIUM PVC AIR HOSES FEATURE AN OIL-RESISTANT TUBE AND COVER, FLEXIBLE KINK PROOF CONSTRUCTION AND A GOOD TEMPERATURE. BEND RESTRICTORS EXTEND SERVICE LIFE
-JAS3/8X100>
Premium belts have the highest power density of any V-belt and stretch dramatically less than standard cross sections. That's why they're ideal for use on problem drives requiring high-impact strength and load-carrying power. Replaces several belts with the strength of a single belt. Banded belts feature a multiple layer tie band that provides excellent lateral rigidity to prevent belts from turning over or from coming off of the drive.
1/4"-ID X 100 FPT LENGTH AIR HOSE. 1/4" MPT NON-SWIVEL FITTING ON EACH END. RED COLOR.
-JAS1/4X100>
At Sioux Chief we design our open flanges with the same care and precision as we do the TKO. Contractors have found the open flange to be a cost effective alternative in those instances where a test cap is not needed. These include installations after the system is tested or where no testing is performed. We complement our complete line of open flanges with five different connection types, in ABS or PVC, 1-piece or with a corrosion-resistant, 430 stainless steel swivel ring.
Milwaukee® 48-42-5850 Heavy Duty Jig Saw Blade, 4 in L x 9/32 in W, 8 TPI, Bi-Metal Cutting Edge, Bi-Metal Body
Milwaukee® T-Shank Bi-Metal Jig Saw blades are designed and manufactured for the professional user. Bi-metal blades last longer than high speed steel or carbon blades. Detail to the material used, tooth shape and sharpness make these blades cut clean, fast, and have a longer life. This blade uses a T-Shank design and fits Milwaukee Jig Saws other popular brands. Includes 5 individual blades.
