Non-Woven Flap Wheels
SAIT 1X1X1/4 INTERLEAF FLAP WHEEL 80-G SAI 77702
Interleaf flap wheels are constructed with alternating flaps of surface conditioning material and coated abrasives material for a high cut rate and a uniform scratch pattern
Provides blending action while leaving final finish on work piece
Smear-resistant non-woven material for clean, smear-proof work surfaces
Interleaf design makes product more aggressive than SAIT non-woven flap brushes and less aggressive than SAIT coated abrasive flap wheels
Available in two grades: Medium and Very Fine
Medium (General Purpose): Excellent for removing heavy oxidation, blending, cleaning, and deburring. Medium surface conditioning material with either 60 or 80 grit coated abrasive material
Very Fine: Excellent for grain finishing, satin finishing, and linear scratch patterns. Very Fine surface conditioning material with either 120 or 180 grit coated abrasive material
Recently Viewed
1" -FEMALE PIPE THREAD METAL BLACK CAP-JPW1BCA >
Littelfuse® POWR-GARD® NLN007 Fast Blow One Time Fuse, 7 A, 250 V AC/DC, 20/50 kA Interrupt, Class: K5, Cartridge Body
NLN series fuses provide low cost protection for general purpose feeder and branch circuits when available short circuit currents are less than 50000 A. They replace all Class H fuses which have only a 10000 A interrupting rating. They are suitable for use in many residential and smaller commercial and industrial applications. NLKP series fuses are Canadian "Code" fuses specifically designed to meet Canadian electrical code type P fuse requirements for residential use. They have a 10000 A interrupting rating. However, to obtain the added benefits of time delay, current limitation and higher interrupting rating, consider the use of POWR-PRO® IDSR Indicator fuses for circuits between 250 and 600 V. The user gets all the benefits of time delay RK5 fuses plus the added benefits of a n indicating fuse that tells when it has opened. complete information on these fuses may be found in the POWR-PRO® section of this catalog. for circuits upto 250 V, see FLNR fuses in this section of the catalog.
HCI Preferred Supplier 18009 Ferrule Tube Sleeve, 3/4 in, Compression, Brass
HCI Preferred Supplier 18009 Ferrule Tube Sleeve, 3/4 in, Compression, Brass
Bolt Size: 1/4 in.-20
Diameter: 0.438 in.
Finish: Zinc
Grip Range: 0.015 in. - 0.187 in.
Head Diameter: 0.625 in.
Head Thickness: 0.073 in.
Hole Diameter: 0.434 in. - 0.450 in.
Material: 1010 Steel
Overall Length: 0.731 in.
Spread: 0.890 in.
Littelfuse® POWR-GARD® NLS010 Fast Blow One Time Fuse, 10 A, 600 V AC/500 V DC, 20/50 kA Interrupt, Class: K5, Cartridge Body
NLS series fuses provide low cost protection for general purpose feeder and branch circuits when available short circuit currents are less than 50000 A. They replace all Class H fuses which have only a 10000 A interrupting rating. They are suitable for use in many residential and smaller commercial and industrial applications. NLKP series fuses are Canadian "Code" fuses specifically designed to meet Canadian electrical code type P fuse requirements for residential use. They have a 10000 A interrupting rating. However, to obtain the added benefits of time delay, current limitation and higher interrupting rating, consider the use of POWR-PRO® IDSR Indicator fuses for circuits between 250 and 600 V. The user gets all the benefits of time delay RK5 fuses plus the added benefits of a n indicating fuse that tells when it has opened. complete information on these fuses may be found in the POWR-PRO® section of this catalog. for circuits upto 250 V, see FLNR fuses in this section of the catalog.
6-LB LEAD HAMMER WITH STEEL HANDLE - COO118>
