ARC 38023 9-1/8" X 5/8"-11 50 GRIT ALUMINUM OXIDE PREMIUM RESIN FIBER DISC
ARC ABRASIVES RESIN FIBER DISC IS SPECIFICALLY ENGINEERED FOR APPLICATIONS SUCH AS WELD REMOVAL, STOCK REMOVAL, SURFACE GRINDING, BLENDING, AND DEBURRING. PERFECT FOR USE ON MILD STEEL AND ALUMINUM
-ARC38023>
Recently Viewed
ARC ABRASIVES RESIN FIBER DISC IS SPECIFICALLY ENGINEERED FOR APPLICATIONS SUCH AS WELD REMOVAL, STOCK REMOVAL, SURFACE GRINDING, BLENDING, AND DEBURRING. PERFECT FOR USE ON MILD STEEL AND ALUMINUM
-ARC38023>
115.5" BI-METAL BANDSAW BLADE-MOR3955131154>
MORSE® 32329 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/4-12 Thread, H4 Thread Limit, Tapered Chamfer, 6 Flutes, Bright, HSS
Koyo IR-2424 Inch Series Regular Width Inner Ring, 1-1/2 in ID x 1-3/4 in OD, 1.515 in OAW, For Use With Inch Series Drawn Cup Needle Roller Bearing, Steel
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
#6 X 2" Flat Head Phillips Sheet Metal Screw
SMALL RESPIRATORS-MOL8111 >
