85144 SAIT/UNITED ABRASIVE PRODUCTS 20 Inch X 2 Inch Floor Sanding Disc 40 Grit Silion Carbide Grain
Silicon carbide grain
Closed coat for more material removal
Excellent for general refinishing
Recently Viewed
85144 SAIT/UNITED ABRASIVE PRODUCTS 20 Inch X 2 Inch Floor Sanding Disc 40 Grit Silion Carbide Grain
Silicon carbide grain
Closed coat for more material removal
Excellent for general refinishing
3/4" X 2" PVC NIPPLE-JWH439948 >
SM SSN402.0X03.0 Nipple
Precision Brand® 16AN10 Flat Sheet Shim Stock, 1008-1010 Full Hard Steel, 18 in L x 6 in W x 0.01 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Precision Brand® 16A3 Shim Stock, 1008-1010 Full Hard Steel, 100 in Roll L x 6 in W x 0.003 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Dodge® 131836 206 Normal Duty Pillow Block Ball Bearing Unit, 1-3/16 in Dia Bore, 4-1/4 to 5 in L Bolt Center-to-Center, 1.56 in Base to Bore Centerline, 6-1/4 in OAL x 3.19 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
