BRUSH RESEARCH GBD-41/2180-SC Heavy Duty Flexible Cylinder Hone, 4-1/2 in Dia Bore, 6 in L Abrasive, 13-1/2 in OAL, 180 Grit
The BRM Flex- Hone® Tool is a resilient, flexible honing tool with a soft cutting action. It's unique construction allows the abrasive globules or "stones" to float, assuring the tool will be self-centering, self-aligning to the bore and self-compensating for wear. The tool is available in a variety of different grits and sizes ranging from 4 mm to 36 in. Whether your need is cross hole deburring, surface finishing or edge blending there is a Flex- Hone® Tool designed for you. A non-directional or crosshatched pattern is created on the surface that contains valuable valleys between the plateaus for oil retention. Finer grits can assist with achieving single RA finishes. In Automotive, Hydraulic, Pneumatic or Industrial applications, the Flex- Hone® Tool will provide a superior surface finish bringing increased product performance, longer product life and less product reject.
-
BrandFlex-Hone®
-
UPC843469150189
-
Manufacturer Part NumberGBD41218
-
CountryUSA
-
Maximum Speed1200 rpm
-
TypeHeavy Duty
-
Grit180
-
Abrasive Length6 in
-
Abrasive MaterialSilicon Carbide
-
Applicable MaterialsMild Steel, Stainless Steel, Cast Iron and Other Softer Ferrous Materials
-
SeriesGBD
-
Bore Diameter4-1/2 in
-
Overall Length13-1/2 in
- Proudly made in the USA
- Self centering, self aligning, self compensating for wear
- Can be used in virtually any rotating spindle
- Commonly used for finishing, deburring and edge breaking
- Typically achieves a finish of 30 to 40 uin (0.7 to 1 um)
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | MJ73450180 |
-
UNSPSC31191500
-
Package DescriptionEACH
-
Standards/ApprovalsPROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
-
Technical Bulletin
Recently Viewed
BRUSH RESEARCH GBD-41/2180-SC Heavy Duty Flexible Cylinder Hone, 4-1/2 in Dia Bore, 6 in L Abrasive, 13-1/2 in OAL, 180 Grit
The BRM Flex- Hone® Tool is a resilient, flexible honing tool with a soft cutting action. It's unique construction allows the abrasive globules or "stones" to float, assuring the tool will be self-centering, self-aligning to the bore and self-compensating for wear. The tool is available in a variety of different grits and sizes ranging from 4 mm to 36 in. Whether your need is cross hole deburring, surface finishing or edge blending there is a Flex- Hone® Tool designed for you. A non-directional or crosshatched pattern is created on the surface that contains valuable valleys between the plateaus for oil retention. Finer grits can assist with achieving single RA finishes. In Automotive, Hydraulic, Pneumatic or Industrial applications, the Flex- Hone® Tool will provide a superior surface finish bringing increased product performance, longer product life and less product reject.
BBI 847680 Partially Threaded Cap Screw, 1-8, 5-1/2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847680 Partially Threaded Cap Screw, 1-8, 5-1/2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
MCR Safety FB119 Frostbite® Plus Safety Glasses, Anti-Scratch, Indoor/Outdoor Clear Mirror Lens, Black, Nylon Frame, Polycarbonate Lens, ANSI Z87.1-2003
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
FEMALE TRAILER PLUG-RED20030 >
APOLLO VALVE LOCKING HANDLE-NIBW648400 >
