SAIT 2-3/4" X 3-1/2" X 5/8" GRIND/STONE SAI 25008
United Abrasives-SAIT 25008 General Purpose Grinding Cone, 2-3/4 in Dia Max, Conical Shape
-
BrandUnited Abrasives-SAIT
-
UPC699053250083
-
Manufacturer Part Number25008
-
CountryUSA|Canada
-
Maximum Speed13200 rpm
-
TypeGeneral Purpose
-
GradeFine
-
GritA16
-
Abrasive MaterialAluminum Oxide
-
Bond TypeResinoid
- Fast stock removal
- Large grit and can be used to remove stock quickly
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 4020-25008 |
-
UNSPSC31191500
-
Package Description10/BX
-
Standards/ApprovalsANSI B7.1
-
SDS
Recently Viewed
United Abrasives-SAIT 25008 General Purpose Grinding Cone, 2-3/4 in Dia Max, Conical Shape
Simmons 905 Frost-Proof Yard Hydrant, 3/4 in, FNPT x Male Hose Thread, 5 ft Bury, Handle Shut-Off
The Simmons Sanitary Yard Hydrant is engineered to be fully self-contained and easily serviced in the field. It permits water flow year around, even in freezing weather, yet there is no ground contamination nor contamination of the water supply. This hydrant drains back into the stainless steel canister.
Browning® 1296854 Fixed Flange Drive Tightener, Malleable Iron
BBI 455090 Partially Threaded Cap Screw, 5/16-18, 2-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455090 Partially Threaded Cap Screw, 5/16-18, 2-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
Drillco 200A101 Jobber Length Drill Bit, 1/64 in Drill - Fraction, 0.0156 in Drill - Decimal Inch, 118 deg Point, HSS, Oxide Treated
200/240/280 series drills are designed for general purpose drilling under a wide range of conditions. For low to medium tensile strength materials. The surface treatment prevents chip welding, improves chip flow and increases abrasion resistance.
Dichtomatik 75115172 O-Ring, 136 Dash Number, 1.987 in ID x 2.193 in OD, PTFE, 55 Durometer, Import, Custom 136-TEFLON
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.


