United Abrasives-SAIT 27405 Mounted Point, A11 Point, 7/8 in Dia x 2 in L Head, 1/4 in Dia Shank
United Abrasives-SAIT 27405 Mounted Point, A11 Point, 7/8 in Dia x 2 in L Head, 1/4 in Dia Shank
-
BrandUnited Abrasives-SAIT
-
UPC699053274058
-
Manufacturer Part Number27405
-
CountryUSA|Canada
-
Maximum Speed19860 rpm
-
GradeMedium
-
GritA36
-
Abrasive MaterialAluminum Oxide
-
Head Diameter7/8 in
-
Head Length2 in
-
Shank Diameter1/4 in
-
Shank Length1-1/2 in
-
Bond TypeResin
-
Overall Length3-1/2 in
- These mounted bonded points are a low cost alternative to carbide burs
- Each point is dressed for perfect balance to perform without vibration or run out
- Mandrel overhang "O" must always be the lowest possible
- Maximum speeds given refer to overhang "O" equal to 1/2 in
- For use with die grinders
- Fast stock removal
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 4020-27405 |
-
UNSPSC23131514
-
Package Description10/BX
-
Standards/ApprovalsOSHA 29 CFR 1910.1200
-
SDS
Recently Viewed
United Abrasives-SAIT 27405 Mounted Point, A11 Point, 7/8 in Dia x 2 in L Head, 1/4 in Dia Shank
United Abrasives-SAIT 27405 Mounted Point, A11 Point, 7/8 in Dia x 2 in L Head, 1/4 in Dia Shank
MORSE® Edge Hog® 59875 5970 Premium Carbide Burr, End Cut End, Cylindrical Head, 1/8 in Dia Head, 1/2 in L of Cut, 2 in OAL, Double Cut
MORSE® Edge Hog® 59875 5970 Premium Carbide Burr, End Cut End, Cylindrical Head, 1/8 in Dia Head, 1/2 in L of Cut, 2 in OAL, Double Cut
24" ALUMINUM RAFTER SQUARES-JWH365624>
12" INTERNALLY BRACED WIND TURBINE ATTIC VENTILATOR. LIMITED LIFETIME WARRANTY-JWH114162 >
United Abrasives-SAIT 82420 DA-F Handy Utility Open Coated Handy Roll, 50 yd L x 2 in W, 240 Grit, Very Fine Grade, Aluminum Oxide Abrasive, Cloth Backing
United Abrasives-SAIT 82420 DA-F Handy Utility Open Coated Handy Roll, 50 yd L x 2 in W, 240 Grit, Very Fine Grade, Aluminum Oxide Abrasive, Cloth Backing
MORSE® 59886 5970 Premium Cup Brush, End Cut End, Cylindrical Head, 1/2 in Dia Head, 1 in L of Cut, 2-1/4 in OAL, Double Cut
MORSE® 59886 5970 Premium Cup Brush, End Cut End, Cylindrical Head, 1/2 in Dia Head, 1 in L of Cut, 2-1/4 in OAL, Double Cut
