Carbide Burrs
Manufactured with cuts made on the left and right spirals, this design produces a finer finish on material producing smaller chips and slivers
• The double cut offers much smoother operation and greater tool control
• Excellent for confined or hard-to-reach areas
• Precision ground with diamond wheels to produce a very sharp uniform cutting edge
• Tungsten carbide construction for long life and durability
MORSE® 59960 5970 Premium Carbide Burr With Through Coolant, Radius End, Taper Head, 1/8 in Dia Head, 1/2 in L of Cut, 3 in OAL, Double Cut
MORSE® 59914 5970 Premium Carbide Burr With Through Coolant, Radius End, Tree Head, 1/8 in Dia Head, 1/2 in L of Cut, 3 in OAL, Double Cut
MORSE® 59575 5970 Premium Carbide Burr, Radius End, Tree Head, 1/2 in Dia Head, 3/4 in L of Cut, 2-3/4 in OAL, Double Cut
MORSE® 59788 5970 Premium Carbide Burr With Through Coolant, Ball Head, 1/8 in Dia Head, 1/8 in L of Cut, 3 in OAL, Double Cut
MORSE® 59694 5970 Premium Carbide Burr, Ball Head, 1/8 in Dia Head, 1/8 in L of Cut, 1-1/2 in OAL, Double Cut
MORSE® 59603 5970 Premium Grooving Insert, Radius End, Cylindrical Head, 1/8 in Dia Head, 9/16 in L of Cut, 3 in OAL, Double Cut
MORSE® 59692 5970 Premium Taper Saw File, Radius End, Cylindrical Head, 1/8 in Dia Head, 9/16 in L of Cut, 1-1/2 in OAL, Double Cut
MORSE® 59523 5970 Carbide Burr, End Cut End, Cylindrical Head, 3/8 in Dia Head, 3/4 in L of Cut
MORSE® 59883 5970 Premium Cut-Off Wheel, End Cut End, Cylindrical Head, 3/8 in Dia Head, 1 in L of Cut, 2-1/8 in OAL, Double Cut
MORSE® 59657 5970 General Purpose Long Shank Premium Carbide Burr, Flat End, Cylindrical Head, 1/2 in Dia Head, 1 in L of Cut, 7 in OAL, Single Cut
MORSE® 59891 5970 Premium Machinist's File, End Cut End, Cylindrical Head, 7/8 in Dia Head, 1 in L of Cut, 2-5/8 in OAL, Double Cut
MORSE® 59559 5970 Premium Carbide Burr, Ball Head, 7/16 in Dia Head, 3/8 in L of Cut, 2-3/16 in OAL, Double Cut
MORSE® 59835 5970 General Purpose Premium Carbide Burr, End Cut End, Cylindrical Head, 7/16 in Dia Head, 1 in L of Cut, 2-3/16 in OAL, Single Cut
MORSE® 59885 5970 Premium Carbide Burr, End Cut End, Cylindrical Head, 7/16 in Dia Head, 1 in L of Cut, 2-3/16 in OAL, Double Cut
MORSE® 59820 5970 General Purpose Premium Carbide Burr, Flat End, Cylindrical Head, 7/16 in Dia Head, 1 in L of Cut, 2-3/16 in OAL, Single Cut
MORSE® 59510 5970 Premium Indexable Threading Toolholder, Flat End, Cylindrical Head, 7/16 in Dia Head, 1 in L of Cut, 2-3/16 in OAL, Double Cut
MORSE® 59617 5970 Premium PSA Abrasive Disc, Pointed End, Cone Head, 5/8 in Dia Head, 1 in L of Cut, 2-3/4 in OAL, Double Cut
MORSE® 59610 5970 Premium Carbide Burr, Radius End, Taper Head, 5/8 in Dia Head, 1-5/16 in L of Cut, 3-1/16 in OAL, Double Cut
MORSE® 59783 5970 Premium Carbide Burr, Flame Head, 5/8 in Dia Head, 1-7/16 in L of Cut, 3-3/16 in OAL, Double Cut
MORSE® 59568 5970 Premium Carbide Burr, Oval Head, 5/8 in Dia Head, 1 in L of Cut, 2-3/4 in OAL, Double Cut
MORSE® 59887 5970 Premium Mill File, End Cut End, Cylindrical Head, 5/8 in Dia Head, 1 in L of Cut, 2-3/8 in OAL, Double Cut
MORSE® 59512 5970 Premium Carbide Burr, Flat End, Cylindrical Head, 5/8 in Dia Head, 1 in L of Cut, 2-3/8 in OAL, Double Cut
MORSE® 59606 5970 Premium Carbide Burr, Radius End, Taper Head, 5/16 in Dia Head, 7/8 in L of Cut, 2-5/8 in OAL, Double Cut
Recently Viewed
Milwaukee® 48-62-6020 Scaling Chisel, SDS-Plus Shank, 1-1/2 in W Blade, 8 in OAL
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Cleans concrete, scale, rust, cuts troughs and some asphalt. This chisel is specifically designed for SDS Plus rotary hammers and should be used in hammer only mode.
T-5 4-LAMP LIGHT FIXTURE WITH 10' CORD-CRSGH4RA454UNIV10C >
Browning 15:1 RAIDER WORM GEAR REDUCERS BRW 262-Q-140-LR-15
Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.
GearWrench® 86914 Combination Wrench, 14 mm Wrench, 12 Points, 15 deg Offset, 8.378 in OAL, Alloy Steel, Polished Chrome, ANSI/ASME
GEARWRENCH 90-tooth ratcheting wrench swing arc of just 4° turns fasteners in extremely tight spaces. Longer, wider beam delivers improved reach, leverage, and comfort. Large color-coded SAE/metric markings make size identification easy. All exceed ASME performance specs and come with the trusted GEARWRENCH Full Lifetime Warranty.
Apex® MDB-14 Magnetic Power Drive Nutsetter, 7/16 in Hex Point, Hex Shank, 2-9/16 in OAL, Steel
Apex® MDB-14 Magnetic Power Drive Nutsetter, 7/16 in Hex Point, Hex Shank, 2-9/16 in OAL, Steel
MORSE® 31206 1195 Adjustable Round Split Threading Die, 11/16-16 UNS Thread, 5/8 in THK, 2 in OD Die, Carbon Steel