MORSE C/Tool 1/2" SL-4 TAPER-SHAPE CARBIDE BURR MCT 59608
MORSE® 59608 5970 Premium Carbide Burr, Radius End, Taper Head, 1/2 in Dia Head, 1-1/8 in L of Cut, 2-7/8 in OAL, Double Cut
-
BrandMORSE®
-
UPC686125596088
-
Manufacturer Part Number59608
-
CountryUSA
-
Maximum Speed36000 rpm
-
TypePremium
-
Head CoatingBright
-
Head Diameter1/2 in
-
Head MaterialSolid Carbide
-
Head ShapeTaper
-
Applicable MaterialsBrass, Cast Iron and Copper
-
Series5970
-
Cut TypeDouble
-
Shank Diameter1/4 in
-
Included Angle14 deg
-
Industry SpecificationSL-4
-
End TypeRadius
-
Length of Cut1-1/8 in
-
Overall Length2-7/8 in
- Design reduces the pulling action, reduces size of chips
-
UNSPSC23251706
-
Package Description1/PK
-
Standards/ApprovalsPROP65: This product contains a chemical known to the State of California to cause cancer or Birth defects. For more information go to www.P65Warnings.ca.gov
-
Catalog
Recently Viewed
MORSE® 59608 5970 Premium Carbide Burr, Radius End, Taper Head, 1/2 in Dia Head, 1-1/8 in L of Cut, 2-7/8 in OAL, Double Cut
MCR Safety STSLXL Luminator™ STSL Short Sleeve T-Shirt, XL, Fluorescent Lime, Polyester, 29.9 in L
Chapin® 1949 Concrete Open Head Sprayer, 3.5 gal, 0.5 to 1 gpm, 40 to 60 psi, 48 in Hose Length, Tri-poxy® Steel Tank
The Chapin® industrial FKM concrete sprayer has a 3.5 gal Tri-Poxy® lined steel tank that provides triple protection against rust, corrosion and damage from denting. Featuring a large 4 in mouth opening for easy filling and cleaning, brass wand, brass shut-off, brass fan tip nozzle for even coverage, a 48 in reinforced hose with threaded fittings and FKM seals for most concrete sealer applications (check chemical manufacturers instructions before use). Our open head tanks have a unique tri-lock seal that insures the pump cap locks tightly into place.
United Abrasives-SAIT 1AX Quick Ship™ 60865 Semi-Friable Coated Abrasive Belt, 4 in W x 36 in L, 220 Grit, Very Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
TAPERED ROLLER BEARING CONE - TIMHM801346>
MORSE® 95075 5968T Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, TiAlN Coated
