Mandrels & Spindles
Weiler® 07766 Drive Mandrel, 4 in OAL, For Use With 2 in, 3 in Dia Bob Cat Mini Flap Disc
Weiler® 07766 Tool Drive Mandrel
Dremel® EZ402 Lock Mandrel, 3.2 mm Shank, 11 mm OAL
Dremel® 402 Mandrel, 1/8 in Shank, 2-3/4 in OAL, For Use With Dremel® 409, 411, 412, 413, 420, 423, 425, 426, 456, 511, 512, 540 and 541 Polishing Bits, Cut-Off Wheel
Dremel® 402 Mandrel, 1/8 in Shank, 2-3/4 in OAL, For Use With Dremel® 409, 411, 412, 413, 420, 423, 425, 426, 456, 511, 512, 540 and 541 Polishing Bits, Cut-Off Wheel
Dremel® 401 Mandrel, 0.125 in Shank, 1.5 in OAL, For Use With Dremel 414, 422 and 429
Dremel® 401 Mandrel, 0.125 in Shank, 1.5 in OAL, For Use With Dremel 414, 422 and 429
ARC™ 50330 Mandrel, 1/4 in Shank, 8 in OAL, For Use With Eyelet
Recently Viewed
OIL SEALS-IMPORT-IMS17282>
Klein® 66031 3-in-1 Single Ended Slotted Impact Socket, Cross Hole Style, 1/2 in, 3/4 x 9/16 in, 12 Points
The 3-in-1 Slotted Impact Socket features an alignment slot to tighten and loosen most hot-line clamps. The single socket offers hands-free adjustment between the sizes needed for pole hardware installation and removal. Includes 3/4-Inch and 9/16-Inch hex sizes in a high torque, 12-Point design. Engineered to be used with an impact driver.
Klein® 3146 Linesmen Wrench, 5/8 to 13/16 in, 29/32 to 1-3/32 in, 13 in OAL
Klein Tools' Lineman's Wrenches are forged from special bar steel and heat-treated for durability and long life. These wrenches are designed for use on heavy three-bolt guy clamps where clearance is limited. Each end has two different size openings, plus a hole at the larger end for turning-in standard pole steps.
500 kcmil min. Conductor Size; 4 AWG Max. Conductor Size; Copper/Aluminum Conductor Material; UL, CSA Approval; 600 Volt Voltage Rating; 2 Port(S); in-Line Cable Entry; Nimbus [R] Brand; RoHS Compliant
V6" EXTRA HEAVY DOOR PULL-NTL162594 >
Proto® TorquePlus™ J5312H Deep Length Socket, Imperial, 1/2 in Square Drive, 3/8 in
