Weiler® 01075 TLN-6 Narrow Face Wheel Brush, 6 in Dia Brush, 3/4 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 1/2 to 5/8 in Arbor Hole
Weiler® 01075 TLN-6 Narrow Face Wheel Brush, 6 in Dia Brush, 3/4 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 1/2 to 5/8 in Arbor Hole
-
BrandWeiler®
-
UPC012382010751
-
Manufacturer Part Number01075
-
CountryUSA|Canada
-
Face Width3/4 in
-
Filament/Wire Diameter0.014 in
-
Filament/Wire TypeCrimped
-
Fill MaterialSteel
-
Maximum Speed6000 rpm
-
Trim Length1-7/16 in
-
TypeNarrow Face
-
Arbor Hole Size1/2 to 5/8 in
-
SeriesTLN-6
-
Attachment TypeUnthreaded Arbor
-
Brush Diameter6 in
- Intended for use on straight grinders and stationary machines such as bench or pedestal grinders and buffing lathes
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | MK5101075 |
| Fastenal | 5138-01075 |
-
Alternative Part Number1075
-
UNSPSC31171805
-
Package Description10/PK
-
Standards/ApprovalsANSI B165.1|OSHA 29 CFR 1910.1200|PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
-
SDS
Recently Viewed
Weiler® 01075 TLN-6 Narrow Face Wheel Brush, 6 in Dia Brush, 3/4 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 1/2 to 5/8 in Arbor Hole
Weiler® 01075 TLN-6 Narrow Face Wheel Brush, 6 in Dia Brush, 3/4 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 1/2 to 5/8 in Arbor Hole
The Super Smart Ball Bushing® bearing family represents a major advancement in linear bearing technology worldwide. These patented and universally self-aligning bearings offer twice the load capacity or eight times the travel life of our industry standard Super Ball Bushing® bearing. To minimize installation time and cost, the Super Smart Ball Bushing® bearing can be ordered factory-installed in an industry standard single or twin pillow block.
Luminator® Hi-Visibility Rain Gear .40mm PU / Cotton Poly Blend Stretch Fabric 2 Piece Hi Vis Reflective Rain Suit Meets ANSI/ISEA 107 2020 Standard Type R Class 3 Compliant Stretch fabric moves with you for a more comfortable fit For those applications where being seen is of the utmost importance, MCR Safety's Luminator® Series offers you a variety of high visibility garments made in different colors and different options of reflective material. The 5182 is a fluorescent lime 2 pc suit made up of a rain jacket with attached hood and elastic waist pants. It features 2-inch silver reflective stripes and meets or exceeds ANSI/ISEA 107 2020 Class 3 high visibility standards. The jacket has a zipper front with storm flap, 2 front patch pockets, and elastic inner cuffs in the sleeves. The pants feature a drawstring elastic waist and have expandable ankle gussets. This garment is treated to be limited flammability and has been tested in accordance with the ASTM D-6413 test method. If you are looking for the best rainwear options, look no further than MCR Safety! This garment is not flame resistant as defined by ANSI/ISEA 107 Section 10.5.
METRIC V-BELT 1600MM-JASSPA1600 >
