Weiler® 08045 ST-4 Heavy-Duty Wheel Brush, 4 in Dia Brush, 1/2 in W Face, 0.014 in Dia Filament/Wire Standard/Twist Knot Filament/Wire, 1/2 to 5/8 in Arbor Hole
Weiler® 08045 ST-4 Heavy-Duty Wheel Brush, 4 in Dia Brush, 1/2 in W Face, 0.014 in Dia Filament/Wire Standard/Twist Knot Filament/Wire, 1/2 to 5/8 in Arbor Hole
-
BrandWeiler®
-
UPC012382080457
-
Manufacturer Part Number08045
-
CountryUSA|Canada
-
Face Width1/2 in
-
Filament/Wire Diameter0.014 in
-
Filament/Wire TypeStandard/Twist Knot
-
Fill MaterialSteel
-
Maximum Speed20000 rpm
-
Trim Length7/8 in
-
TypeHeavy-Duty
-
Arbor Hole Size1/2 to 5/8 in
-
SeriesST-4
-
Attachment TypeUnthreaded Arbor
-
Brush Diameter4 in
- Provide heavy duty brushing action with some flexibility
- Knot wire wheels with an arbor hole are intended for use on straight grinders and stationary machines such as bench or pedestal grinders and buffing lathes
- Featuring Weiler's individual knot hole construction, these radial brushes are available in heat-treated steel, type 302 stainless steel and bronze wire for use in a wide variety of applications
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 0813310 |
| MSC | 75845222 |
-
Alternative Part Number8045
-
UNSPSC31171805
-
Package Description10/PK
-
Standards/ApprovalsANSI B165.1|OSHA 29 CFR 1910.1200|PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
-
SDS
Recently Viewed
Weiler® 08045 ST-4 Heavy-Duty Wheel Brush, 4 in Dia Brush, 1/2 in W Face, 0.014 in Dia Filament/Wire Standard/Twist Knot Filament/Wire, 1/2 to 5/8 in Arbor Hole
Weiler® 08045 ST-4 Heavy-Duty Wheel Brush, 4 in Dia Brush, 1/2 in W Face, 0.014 in Dia Filament/Wire Standard/Twist Knot Filament/Wire, 1/2 to 5/8 in Arbor Hole
Weiler® 08075 Wheel Brush, 6 in Dia Brush, 1/2 in W Face, 0.0118 in Dia Filament/Wire Standard/Twist Knot Filament/Wire, 1/2 to 5/8 in Arbor Hole
Weiler® 6 in standard twist knot wire Wheel Brush provides a heavy duty brushing action with some flexibility for demanding deburring cleaning and surface preparation applications on somewhat irregular surfaces. Featuring Weiler® individual knot hole construction, these radial brushes are available in heat treated steel, type 302 stainless steel and bronze wire for use in a wide variety of applications. 5/8 to 1/2 in arbor hole for use on bench/pedestal grinder, die grinder, right angle die grinder and straight grinders.
Morse® AV26 Master Cobalt® Heavy Duty Hole Saw, 1-5/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Justrite® 27220 Safety Rinse Tank, 22 gal Capacity, 12 in H, Galvanized Steel, Red
Self-close cover, operated by foot-treadle, allows a worker to open with both hands full. An adjustable-rate pneumatic cylinder prevents the cover from slamming shut when the treadle is released. Drain plug allows for easy solvent replacement. Use to clean large parts easily.
TOILET SEAT COVERS--PK/125-SCO07410 >



