Weiler® 08178 ST-10 Heavy-Duty Wheel Brush, 10 in Dia Brush, 3/4 in W Face, 0.014 in Dia Filament/Wire Standard/Twist Knot Filament/Wire, 3/4 in Arbor Hole
Weiler® 08178 ST-10 Heavy-Duty Wheel Brush, 10 in Dia Brush, 3/4 in W Face, 0.014 in Dia Filament/Wire Standard/Twist Knot Filament/Wire, 3/4 in Arbor Hole
-
BrandWeiler®
-
UPC012382081782
-
Manufacturer Part Number08178
-
CountryUSA|Canada
-
Face Width3/4 in
-
Filament/Wire Diameter0.014 in
-
Filament/Wire TypeStandard/Twist Knot
-
Fill MaterialSteel
-
Maximum Speed4500 rpm
-
Trim Length1-3/4 in
-
TypeHeavy-Duty
-
Arbor Hole Size3/4 in
-
SeriesST-10
-
Attachment TypeUnthreaded Arbor
-
Brush Diameter10 in
- Provide heavy duty brushing action with some flexibility
- Knot wire wheels with an arbor hole are intended for use on straight grinders and stationary machines such as bench or pedestal grinders and buffing lathes
- Featuring Weiler's individual knot hole construction, these radial brushes are available in heat-treated steel, type 302 stainless steel and bronze wire for use in a wide variety of applications
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 71243687 |
| Fastenal | 0813322 |
-
Alternative Part Number8178
-
UNSPSC31171805
-
Package Description2/PK
-
Standards/ApprovalsANSI B165.1|OSHA 29 CFR 1910.1200|PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
-
SDS
Recently Viewed
Weiler® 08178 ST-10 Heavy-Duty Wheel Brush, 10 in Dia Brush, 3/4 in W Face, 0.014 in Dia Filament/Wire Standard/Twist Knot Filament/Wire, 3/4 in Arbor Hole
Weiler® 08178 ST-10 Heavy-Duty Wheel Brush, 10 in Dia Brush, 3/4 in W Face, 0.014 in Dia Filament/Wire Standard/Twist Knot Filament/Wire, 3/4 in Arbor Hole
180-GRIT DRILL DOCTOR DIAMOND WHEEL - JWH315966>
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
5-GAL ANTIWEAR AW-46 HYDRAULIC OIL
#8 X 2-1/2" Pan Head Combo Sheet Metal Screws
Morse MA35PSN (139052), spring loaded arbor provides a 3/8" solid shank that can be used with any standard hole saw with 5/8"-18 thread pitch (1-1/4" to 6-5/8" diameter). The strength of the spring ensures the arbor pins remain engaged during use, effectively handling the torque generated by larger diameter hole saws, preventing thread strippage. Easily change hole saw diameters with efficiency and minimal effort. High speed steel pilot drill for use in wood, ferrous and non-ferrous metals. One (1) arbor per box.
