Weiler® 44156 Industrial Grade Performance Line Maintenance Tube Brush, 3 in Dia x 4-1/2 in L, 7-1/2 in OAL, 0.012 in Dia Filament/Wire, Steel Fill
Weiler® 44156 Industrial Grade Performance Line Maintenance Tube Brush, 3 in Dia x 4-1/2 in L, 7-1/2 in OAL, 0.012 in Dia Filament/Wire, Steel Fill
-
BrandWeiler®
-
UPC012382441562
-
Manufacturer Part Number44156
-
CountryUSA|Canada
-
Filament/Wire Diameter0.012 in
-
Fill MaterialSteel
-
TypeIndustrial Grade Performance Line
-
Handle TypeDouble Stem
-
Overall Length7-1/2 in
-
Brush Diameter3 in
- Wire brushes clean surfaces in the same manner as sandblasting
- Because of using superior quality hardened steel wire rotating at a high rate of speed, the brushes have the ability to separate surface contaminants from base material
- Unlike non-woven, bonded and coated abrasives, wire brushes will not load when brushing soft materials or when used to remove paint and similar coatings
- Fitted with 1/4 in x 2 in NPT Pipe Nipple
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 0814112 |
-
UNSPSC27113002
-
Package DescriptionEACH
-
Standards/ApprovalsANSI B165.1|CSA Approved
-
Warranty1 year
Recently Viewed
Weiler® 44156 Industrial Grade Performance Line Maintenance Tube Brush, 3 in Dia x 4-1/2 in L, 7-1/2 in OAL, 0.012 in Dia Filament/Wire, Steel Fill
Weiler® 44156 Industrial Grade Performance Line Maintenance Tube Brush, 3 in Dia x 4-1/2 in L, 7-1/2 in OAL, 0.012 in Dia Filament/Wire, Steel Fill
WIRE USED FOR COMMERCIAL AND INDUSTRIAL INSTALLATIONS. IT CAN BE USED IN WET OR DRY LOCATIONS. USED IN CONDUIT, CABLE TRAYS, BRANCH CIRCUITS, AND APPLIANCE WIRING.
- ALE4THHNWHT >
3/4-B-45-STE 3/4" 45-d Black Street Elbow
3/4" 45-D BLACK STREET ELBOW-FIT3/4B45STE >
Minimum Number of Clips: A minimum of 3 clips must be applied to securely form a wire rope eye or termination loop. Torque Requirement: The nuts must be tightened evenly to a minimum torque of 95 ft-lbs to prevent cable slippage .Rope Turn-Back: You must allow for exactly 12 inches of cable turn-back from the base of the eye to ensure adequate length for clip placement. Efficiency Rating: Properly installed clips on 9/16" wire rope yield an 80% efficiency rating based on the catalog breaking strength of the wire rope.
Plews® 55-303 Hand Operated Standard Self-Priming Rotary Barrel Pump, 1 gal/18 Revolutions Flow Rate, 3/4 in FNPT Inlet x 1-1/16 in Outlet
Plews® 55-303 Hand Operated Standard Self-Priming Rotary Barrel Pump, 1 gal/18 Revolutions Flow Rate, 3/4 in FNPT Inlet x 1-1/16 in Outlet
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
