Weiler® 44149 Industrial Grade Performance Line Maintenance Tube Brush, 1 in Dia x 4-1/2 in L, 7-1/2 in OAL, 0.012 in Dia Filament/Wire, Steel Fill
Weiler® 44149 Industrial Grade Performance Line Maintenance Tube Brush, 1 in Dia x 4-1/2 in L, 7-1/2 in OAL, 0.012 in Dia Filament/Wire, Steel Fill
-
BrandWeiler®
-
UPC012382441494
-
Manufacturer Part Number44149
-
CountryUSA|Canada
-
Filament/Wire Diameter0.012 in
-
Fill MaterialSteel
-
TypeIndustrial Grade Performance Line
-
Handle TypeDouble Stem
-
Overall Length7-1/2 in
-
Brush Diameter1 in
- Wire brushes clean surfaces in the same manner as sandblasting
- Because of using superior quality hardened steel wire rotating at a high rate of speed, the brushes have the ability to separate surface contaminants from base material
- Unlike non-woven, bonded and coated abrasives, wire brushes will not load when brushing soft materials or when used to remove paint and similar coatings
- Fitted with 1/4 in x 2 in NPT Pipe Nipple
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 0814108 |
-
UNSPSC27113002
-
Package DescriptionEACH
-
Standards/ApprovalsANSI B165.1|CSA Approved
-
Warranty1 year
Recently Viewed
Weiler® 44149 Industrial Grade Performance Line Maintenance Tube Brush, 1 in Dia x 4-1/2 in L, 7-1/2 in OAL, 0.012 in Dia Filament/Wire, Steel Fill
Weiler® 44149 Industrial Grade Performance Line Maintenance Tube Brush, 1 in Dia x 4-1/2 in L, 7-1/2 in OAL, 0.012 in Dia Filament/Wire, Steel Fill
7X8-ZIP-2-MIL 7" X 8" 2-mil Ziplock Bags
7" X 8" 2-MIL ZIPLOCK BAG--BX/1000-WHY7X8ZIP2MIL >
20" GORILLA FLOOR BUFFING PAD-JWH612138>
1/8" X 5/8" WOODRUFF KEY-MED1005 >
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Gates® Power Transmission PowerGrip® GT®3 1120-8MGT-20 Synchronous Belt, 20 mm W, 1120 mm OAL, 8 mm Pitch, 140 Teeth, Neoprene
Engineered with the latest in advanced technology and materials science expertise, Gates PowerGrip™ GT4 delivers the highest power-carrying capacity of any belt in its class. In addition, Gates designed a belt with increased chemical resistance and larger temperature range capability. Gates PowerGrip GT4 belt delivers improved performance over a wide range of industrial applications. The 8MGT and 14MGT pitches are the optimum choice for high performance drives in the machine tool, paper and textile industries where durability and low maintenance are required. From resource processing to heavy manufacturing, automated production to custom assembly — Gates PowerGrip GT4 solutions improve uptime, efficiency, productivity, reliability and safety for industries around the world.
