Weiler® 10006 Stem Mount End Brush, 3/4 in Dia Brush, Crimped, 0.0104 in Dia Filament/Wire, Steel Fill, 7/8 in L Trim
Weiler® 10006 Stem Mount End Brush, 3/4 in Dia Brush, Crimped, 0.0104 in Dia Filament/Wire, Steel Fill, 7/8 in L Trim
-
BrandWeiler®
-
UPC012382100063
-
Manufacturer Part Number10006
-
CountryUSA|Canada
-
Filament/Wire Diameter0.0104 in
-
Filament/Wire TypeCrimped
-
Fill MaterialSteel
-
Maximum Speed22000 rpm
-
Trim Length7/8 in
-
TypeStem Mount
-
Shank Diameter1/4 in
-
Overall Length7 in
-
Brush Diameter3/4 in
- A solid end construction
- Very flexible brushing action
- Ideal for More Demanding Light-Duty Cleaning Applications in Corners and Hard-To-Reach Areas
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 0202173 |
| Berkshire eSupply | MK5110006 |
| MSC | 00462671 |
-
UNSPSC31191521
-
Package Description10/PK
-
Standards/ApprovalsANSI B165.1|CSA Approved
Recently Viewed
Weiler® 10006 Stem Mount End Brush, 3/4 in Dia Brush, Crimped, 0.0104 in Dia Filament/Wire, Steel Fill, 7/8 in L Trim
Weiler® 10006 Stem Mount End Brush, 3/4 in Dia Brush, Crimped, 0.0104 in Dia Filament/Wire, Steel Fill, 7/8 in L Trim
GP® 955MS Standard Length Socket, 1/4 in, 5.5 mm Hex Socket, 6 Points
Klein® 79224 Hex Key, T-Handle Handle, Steel
IDEAL® 774008 Standard Toggle Switch, 125/227 V AC, 20/10 A, 3/4 hp Power Rating, On-Off SPST Contact
IDEAL® 774008 Standard Toggle Switch, 125/227 VAC, 20/10 A, 3/4 hp Power Rating, SPST ON-OFF Contact
variFLUTE™ 97858 5999 Center Cutting Extended Length High Performance Single End End Mill, 1/2 in Dia Cutter, 0.015 in Corner Radius, 5/8 in Length of Cut, 9 Flutes, 1/2 in Dia Shank, 4 in OAL, nACo Coated
variFLUTE™ 97858 5999 Center Cutting Extended Length High Performance Single End End Mill, 1/2 in Dia Cutter, 0.015 in Corner Radius, 5/8 in Length of Cut, 9 Flutes, 1/2 in Dia Shank, 4 in OAL, nACo Coated
Hougen® 12248 12000 Annular Cutter, 1-1/2 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
