Weiler® 12376 Single Row Cup Brush, 6 in Dia Brush, 5/8-11 Arbor Hole, 0.023 in Dia Filament/Wire, Standard/Twist Knot, Steel Fill
Weiler® 12376 Single Row Cup Brush, 6 in Dia Brush, 5/8-11 UNC Arbor Hole, 0.023 in Dia Filament/Wire, Standard/Twist Knot, Steel Fill
-
BrandWeiler®
-
UPC012382123765
-
Manufacturer Part Number12376
-
CountryUSA|Canada
-
Filament/Wire Diameter0.023 in
-
Filament/Wire TypeStandard/Twist Knot
-
Fill MaterialSteel
-
Maximum Speed6600 rpm
-
Trim Length1-3/8 in
-
TypeSingle Row
-
Arbor Hole Size5/8-11
-
Brush Diameter6 in
- Provides Heavy-Duty Brushing Action with Some Flexibility
- Ideal for Demanding Cleaning Applications on Relatively Flat Surfaces
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | MK5112376 |
| MSC | 03598042 |
| Fastenal | 5138-12376 |
-
UNSPSC27111907
-
Package DescriptionEACH
-
Standards/ApprovalsANSI B165.1|CSA Approved
-
Catalog
Recently Viewed
Weiler® 12376 Single Row Cup Brush, 6 in Dia Brush, 5/8-11 Arbor Hole, 0.023 in Dia Filament/Wire, Standard/Twist Knot, Steel Fill
Weiler® 12376 Single Row Cup Brush, 6 in Dia Brush, 5/8-11 UNC Arbor Hole, 0.023 in Dia Filament/Wire, Standard/Twist Knot, Steel Fill
BBI 847082 Partially Threaded Cap Screw, 5/16-18, 1-1/2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847082 Partially Threaded Cap Screw, 5/16-18, 1-1/2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
HCI Preferred Supplier 20164 Swivel Tube to Pipe Run Tee, 3/8 x 3/8 x 1/4 in Nominal, Push-In x Push-In x MNPTF End Style, Brass
HCI Preferred Supplier 20164 Swivel Tube to Pipe Run Tee, 3/8 x 3/8 x 1/4 in Nominal, Push-In x Push-In x MNPTF End Style, Brass
1/4" DIE GRINDER COLLETS-MWK48660975 >
HCI Preferred Supplier 20115 Fixed Tube to Pipe Branch Tee, 1/4 x 1/4 x 1/8 in Nominal, Push-In x Push-In x MNPTF End Style, Brass
HCI Preferred Supplier 20115 Fixed Tube to Pipe Branch Tee, 1/4 x 1/4 x 1/8 in Nominal, Push-In x Push-In x MNPTF End Style, Brass
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.


