Vortec Pro® 36029 Stem Mounted Utility Cup Brush, 2 in Dia Brush, 0.0118 in Dia Filament/Wire, Crimped, Carbon Steel Fill
Vortec Pro® 36029 Stem Mounted Utility Cup Brush, 2 in Dia Brush, 0.0118 in Dia Filament/Wire, Crimped, Carbon Steel Fill
-
BrandVortec Pro®
-
UPC012382360290
-
Manufacturer Part Number36029
-
CountryUSA|Canada
-
Filament/Wire Diameter0.0118 in
-
Filament/Wire TypeCrimped
-
Fill MaterialCarbon Steel
-
Maximum Speed13000 rpm
-
Trim Length5/8 in
-
TypeStem Mounted Utility
-
Shank Diameter1/4 in
-
Brush Diameter2 in
- Designed primarily for use on high speed die grinders, cup brushes with permanently attached stems can also be used on drills
- Designed to be a flexible and economic small diameter brushing tool for a broad range of general purpose applications using air tools or drills
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 0868225 |
-
UNSPSC27111907
-
Package Description1/PK
-
Standards/ApprovalsANSI B165.1|CSA Approved
-
Catalog
Recently Viewed
Vortec Pro® 36029 Stem Mounted Utility Cup Brush, 2 in Dia Brush, 0.0118 in Dia Filament/Wire, Crimped, Carbon Steel Fill
Vortec Pro® 36029 Stem Mounted Utility Cup Brush, 2 in Dia Brush, 0.0118 in Dia Filament/Wire, Crimped, Carbon Steel Fill
1-3/8" 13.5-TON SHACKLES >1018598-CROG20913/8 >
Morse® Matrix II ZWEFC1014MAT-120" Welded Band Saw Blade, 120 in L, 3/4 in W x 0.035 in THK, 10/14 TPI, Bi-Metal Blade, HSS Tooth
Morse® Matrix II ZWEFC1014MAT-120" Welded Band Saw Blade, 120 in L, 3/4 in W x 0.035 in THK, 10/14 TPI, Bi-Metal Blade, HSS Tooth
Morse® 177689 MHS Advanced Hole Saw, 4-1/4 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
The all new advanced bi-metal hole saw by M.K. Morse®. Our latest sawing innovation replaces all current Morse bi-metal hole saw solutions into one, simple optimized powerhouse. Arbor required.
Hougen® Rotabroach® 12136 12000 Annular Cutter, 1-1/8 in Dia Cutter, 1 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Weiler® 14126 Cup Brush, 4 in Dia Brush, 5/8-11 UNC Arbor Hole, 0.02 in Dia Filament/Wire, Crimped, Stainless Steel Fill
Weiler® 14126 Cup Brush, 4 in Dia Brush, 5/8-11 UNC Arbor Hole, 0.02 in Dia Filament/Wire, Crimped, Stainless Steel Fill
