Extension Length Drill Bits

For deep hole drilling. 8" overall length. These drills are made with a general purpose flute design which will perform well under the widest range of operating conditions and materials. Long flutes allow better chip evacuation in deeper holes.

For deep hole drilling. 8" overall length. These drills are made with a general purpose flute design which will perform well under the widest range of operating conditions and materials. Long flutes allow better chip evacuation in deeper holes.

MORSE® 10302 1315 Extra Length Drill, 23/32 in Drill - Fraction, 0.7188 in Drill - Decimal Inch, 12 in OAL, HSS

MORSE® 10303 1315 Extra Length Drill, 3/4 in Drill - Fraction, 0.75 in Drill - Decimal Inch, 12 in OAL, HSS

MORSE® 10305 1315 Extra Length Drill, 11/32 in Drill - Fraction, 0.3438 in Drill - Decimal Inch, 8 in OAL, HSS

MORSE® 10307 1315 Extra Length Drill, 15/32 in Drill - Fraction, 0.4688 in Drill - Decimal Inch, 8 in OAL, HSS

MORSE® 10308 1315 Extra Length Drill, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, 8 in OAL, HSS

MORSE® 10902 1315 Extra Length Drill, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 8 in OAL, HSS

MORSE® 10904 1315 Extra Length Drill, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 12 in OAL, HSS

MORSE® 10909 1315 Extra Length Drill, 5/32 in Drill - Fraction, 0.1562 in Drill - Decimal Inch, 8 in OAL, HSS

MORSE® 10912 1315 Extra Length Drill, 11/64 in Drill - Fraction, 0.1719 in Drill - Decimal Inch, 8 in OAL, HSS

MORSE® 10915 1315 Extra Length Drill, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 8 in OAL, HSS

MORSE® 10918 1315 Extra Length Drill, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 12 in OAL, HSS

MORSE® 10923 1315 Extra Length Drill, 7/32 in Drill - Fraction, 0.2188 in Drill - Decimal Inch, 8 in OAL, HSS

MORSE® 10927 1315 Extra Length Drill, 15/64 in Drill - Fraction, 0.2344 in Drill - Decimal Inch, 8 in OAL, HSS

MORSE® 10928 1315 Extra Length Drill, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, 8 in OAL, HSS

MORSE® 10931 1315 Extra Length Drill, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, 12 in OAL, HSS

MORSE® 10932 1315 Extra Length Drill, 17/64 in Drill - Fraction, 0.2656 in Drill - Decimal Inch, 8 in OAL, HSS

MORSE® 10935 1315 Extra Length Drill, 9/32 in Drill - Fraction, 0.2812 in Drill - Decimal Inch, 8 in OAL, HSS

MORSE® 10936 1315 Extra Length Drill, 19/64 in Drill - Fraction, 0.2969 in Drill - Decimal Inch, 8 in OAL, HSS

MORSE® 10937 1315 Extra Length Drill, 9/32 in Drill - Fraction, 0.2812 in Drill - Decimal Inch, 10 in OAL, HSS

MORSE® 10941 1315 Extra Length Drill, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, 8 in OAL, HSS

MORSE® 10942 1315 Extra Length Drill, 21/64 in Drill - Fraction, 0.3281 in Drill - Decimal Inch, 8 in OAL, HSS

MORSE® 10944 1315 Extra Length Drill, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, 12 in OAL, HSS