Drill Bit Accessories
DeWALT® DW2505 Rapid Load® Compact Hex Holder
GENERAL® S838 Drill Stop Set, For Use With Twist or Brad Point Drill
Milwaukee® 48-03-3540 Spline Adapter, For Use With 86658 5 to 6 in Thinwall Core Bit, 12 in OAL
12 in. Spline adapter for thin wall core bits. Includes shank only.
Milwaukee® 48-03-3545 Core Bit Adapter, SDS-Plus Adapter Shank, For Use With 1 to 1-1/2 in Thinwall Core Bit, 8 in OAL
8 in. SDS Plus adapter for 1 in. to 1-1/2 in. thin wall core bits. Includes shank only.
Milwaukee® 48-03-3551 Core Bit Adapter, SDS-Plus Adapter Shank, For Use With 86757 1 to 1-1/2 in Thinwall Core Bit, 12 in OAL
12 in. SDS Plus adapter for 1 in. to 1-1/2 in. thin wall core bits. Includes shank only.
Milwaukee® 48-03-3555 Core Bit Adapter, SDS-Plus Adapter Shank, For Use With 86795 1-3/4 to 4 in Thinwall Core Bit, 8 in OAL
8 in. SDS Plus adapter for 1-3/4 in. to 4 in. thin wall core bits. Includes shank only.
Milwaukee® 48-03-3561 Core Bit Adapter, SDS-Plus Adapter Shank, For Use With 86856 1-3/4 to 4 in Thinwall Core Bit, 12 in OAL
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
Milwaukee® 48-03-3564 Spline Adapter, For Use With 86887 1-1/2 to 6 in Thickwall Core Bit, 12 in OAL
12 in. Spline adapter for thick wall core bits. Includes shank only.
Milwaukee® 48-03-3565 Spline Adapter, For Use With 86894 1-1/2 to 6 in Thickwall Core Bit, 18 in OAL
18 in. Spline adapter for thick wall core bits. Includes shank only.
Milwaukee® 48-03-3572 Heavy Duty Core Bit Adapter, For Use With SDS Max® 1-1/2 to 6 in THK Wall Core Bit, 12 in OAL
12 in. SDS Max adapter for thick wall core bits. Includes shank only.
Milwaukee® 48-03-3573 Core Bit Adapter, SDS-Max Adapter Shank, For Use With 86979 1-1/2 to 6 in Thickwall Core Bit, 18 in OAL
18 in. SDS Max adapter for thick wall core bits. Includes shank only.
Milwaukee® 48-03-3574 Core Bit Adapter, SDS-Max Adapter Shank, For Use With 86986 5 to 6 in Thinwall Core Bit, 12 in OAL
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
Milwaukee® 48-06-2860 Angle Drill Kit, For Use With 1001-1, 1007-1, 1101-1, 1107-6, 1201-1 and 1250-1 D-Handle Drill, 30 in OAL
Reach floors or ceilings easily with this extension giving up to 30 in. of additional drilling reach. The superior transfer of power and torque allows drilling up to 2-9/16 in. diameter holes. This extension only works with the following models from Milwaukee: 1001-1, 1007-1, 1101-1, 1107-6, 1201-1, 1250-1 (Tool not included).
Milwaukee® 48-20-5174 Replacement Guide Plate, For Use With 48-20-5155 4 in Thickwall Core Bit and 48-20-5199 Centering Pin
Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thick wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.
Milwaukee® 48-20-5199 Replacement Centering Pin, For Use With 48-03-3564, 48-03-3565 and 48-03-3572 1-1/2 to 6 in Thickwall Core Bit
Increase your precision in masonry and concrete drilling with the Milwaukee® centering pin for thick wall core bits.
Milwaukee® 48-20-6150 Replacement Centering Pin, For Use With 48-03-3545, 48-03-3551 and 48-03-3555 Small Thinwall Core Bit
Increase your precision in masonry and concrete drilling with the Milwaukee® centering pin for small thin wall core bits. You'll get exact spot drilling when you use Milwaukee's heavy-duty centering pin and guide plate (not included) for starting holes with your SDS Plus rotary hammer drill.
Milwaukee® 48-20-6151 Replacement Guide Plate, For Use With SDS Max® 48-20-5015 1-1/4 in Thinwall Core Bit and 48-20-6150 Centering Pin
Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thin wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.
Milwaukee® 48-20-6153 Guide Plate, For Use With 48-20-5025 1-1/2 in Thinwall Core Bit and 48-20-6150 Centering Pin
Use for starting a 1-1/4 in. hole drill to a depth of approximately 1/4 in., stop hammer, remove guide plate and center pin. Place core bit back into the grooved area and resume drilling to required depth of hole. Adds bit stability and reduces bit walk.
Milwaukee® 48-20-6155 Replacement Centering Pin, For Use With 48-03-3545, 48-03-3551 and 48-03-3555 Large Thinwall Core Bit
Increase your precision in masonry and concrete drilling with the Milwaukee® centering pin for large thin wall core bits. You'll get exact spot drilling when you use Milwaukee's heavy-duty centering pin and guide plate (not included) for starting holes with all rotary hammer drills.
Milwaukee® 48-20-6156 Replacement Guide Plate, For Use With 48-20-5030 1-3/4 in Thinwall Core Bit and 48-20-6150 Centering Pin
Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thin wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.
Milwaukee® 48-20-6157 Guide Plate, For Use With 48-20-5035 2 in Thinwall Core Bit and 48-20-6155 Center Pin
Use with 48-20-6155 center pin and 48-20-5035 thin wall core bit.
Milwaukee® 48-20-6158 Guide Plate, For Use With 48-20-5040 2-1/2 in Thinwall Core Bit and 48-20-6155 Centering Pin
Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thin wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.
Milwaukee® 48-20-6159 Replacement Guide Plate, For Use With 48-20-5045 3 in Thinwall Core Bit and 48-20-6155 Centering Pin
Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thin wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.
Milwaukee® 48-20-6161 Replacement Guide Plate, For Use With 48-20-5055 4 in Thinwall Core Bit and 48-20-6155 Centering Pin
Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thin wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.
