Service Entrance Cables
Southwire® 13077302 Type SEU/THHN Service Entrance Cable With Ground Wire, 600 V AC, (3) 6-6-6 AWG Stranded Copper Conductor, 150 ft L, Gray
Southwire® Type SEU, service entrance cable is primarily used to convey power from the service drop to the meter base and from the meter base to the distribution panelboard; however, the cable may be used in all applications where Type SE cable is permitted. SEU may be used in wet or dry locations at temperatures not to exceed 90C. Voltage rating is 600 volts.
Recently Viewed
Starrett® 666-5 Straight Leave Thickness Gage With Dispenser Case, 25 ft L x 1/2 in W x 0.005 in THK, Tempered Steel
Starrett 666 Series Thickness Gage or "Feeler" Stock in Rolls. This handy product includes thickness stock, housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gaging narrow slots, etc. This stock is also useful for shimming in fixturing and die work.
2" -OVERALL LENGTH COMPRESSION SPRINGS; MAXIMUM LOAD 51.47 LBS-AJA16 >
5/32 SOLID PUNCH 3/8" HEX - ALL25640 >
Anvil® 0318904083 Square Head Countersunk Pipe Plug, 3/8 in Nominal, MNPT End Style, 300 lb, Merchant Steel, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 300 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI. (6.9 bar).
5/16" LONG TAPER DRIFT PUNCH - ALL25635 >
A GALVANIZED HARD DRAWN COMPRESSION SPRING WITH AN OUTSIDE DIAMETER OF 0.312" AND AN OVERALL LENGTH OF 2.312".
-AJA24 >
