Shower Drains
Jones Stephensâ„¢ D40140 No Caulk Shower Stall Drain With Stainless Steel Strainer, 2 in, 4-1/4 in Stainless Steel Grid, Brass Drain
Jones Stephensâ„¢ D40140 No Caulk Shower Stall Drain With Stainless Steel Strainer, 2 in, 4-1/4 in Stainless Steel Grid, Brass Drain
Jones Stephensâ„¢ D41007 Drop-In Shower Stall Drain With Stainless Steel Strainer, 2 in Nominal, Solvent Weld Connection, 4-1/4 in Stainless Steel Grid, PVC Drain, Domestic
Jones Stephensâ„¢ D41007 Drop-In Shower Stall Drain With Stainless Steel Strainer, 2 in Nominal, Solvent Weld Connection, 4-1/4 in Stainless Steel Grid, PVC Drain, Domestic
Sioux Chief 828-2PK Shower Module Drain, 2 in Nominal, Push-On Connection, 4-1/4 in, PVC Drain
Sioux Chief 827 or 828 series shower module drain shall be used where necessary in drainage systems. Shower drain shall have an outer locknut design with compression gasket connection for Sch. 40 ABS/PVC pipe. Snap-in strainer shall meet all applicable load and flow requirements for intended use. Designed in accordance with ASME A112.18.2-2005/CSA B125.2-05.
Recently Viewed
Browning® 1108992 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 23/32 in Dia Bore, 8.12 in OD, #50 Chain, 39 Teeth, 5/8 in Pitch, Steel
Browning® 1108992 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 23/32 in Dia Bore, 8.12 in OD, #50 Chain, 39 Teeth, 5/8 in Pitch, Steel
5/64" X 1" Split Roll Pins
12-OZ 13" BALL PEIN WOOD HANDLE HAMMER - ALL25703 >
6&12-PT MIDGET 5/16&11/32 - ALL66022 >
#505 3-1/2" BOX ED STEEL HINGE (EA)-NTL140566 >
Martin 6018 1 3/8 Bored-to-Size Roller Chain Sprocket Coupling Hub, 60 Chain, 1-3/8 in Bore Dia 18 Teeth, 4.46 in OD, 3-1/2 in Hub Dia, Steel
Roller chain couplings have a torque capacity in excess of the torque normally transmitted by shafting which falls within the coupling bore range. Select the smallest coupling, which will accommodate both shafts. For a reversing operation, shock or pulsating loads, or other severe operating conditions, select the next larger coupling size. A cover should be used to assure maximum service life, particularly if the coupling operates at high speeds or under moist conditions. For proper lubrication, fill the space between the cover and the coupling with soft to medium consistency coupling grease. Many finished bore sizes available as well as stock bore blanks that can be altered. Chains, covers stocked in all branch locations. All stock roller chain couplings have hardened teeth.
