SLINGS
3/4" X 48" EYE/EYE WIRE ROPE SLING-SWC8FAB862 >
5/8" X 20' EYE/EYE WIRE ROPE SLING-SWC8FAB784 >
5/8" X 15' EYE/EYE WIRE ROPE SLING-SWC8FAB777 >
5/8" X 12' EYE/EYE WIRE ROPE SLING-SWC8FAB776 >
5/8" X 10' EYE/EYE WIRE ROPE SLING-SWC8FAB774 >
5/8" X 8' EYE/EYE WIRE ROPE SLINGS-SWC8FAB770 >
5/8" X 4' EYE/EYE WIRE ROPE SLING-SWC8FAB762 >
1/4" X 48" EYE/EYE WIREROPE SLINGS-SWC8FAB740 >
1/2" X 180" EYE/EYE WIREROPE SLING-SWC8FAB729 >
1/2" X 144" EYE/EYE W/ROPE SLINGS-SWC8FAB726 >
1/2" X 10' EYE/EYE WIREROPE SLINGS-SWC8FAB724 >
1/2" X 8' EYE/EYE WIREROPE SLINGS-SWC8FAB720 >
1/2" X 5' EYE/EYE WIRE ROPE SLING-SWC8FAB717 >
1/2" X 72" EYE/EYE WIRE ROPE SLING-SWC8FAB716 >
1/2" X 48" EYE/EYE WIREROPE SLINGS-SWC8FAB715 >
1/2" X 36" EYE/EYE WIREROPE SLINGS-SWC8FAB714 >
1/2" X 24" EYE/EYE WIREROPE SLINGS-SWC8FAB713 >
3/8" X 168" EYE/EYE WIREROPE SLING-SWC8FAB632 >
3/8" X 120" EYE/EYE WIREROPE SLING-SWC8FAB624 >
3/8" X 96" EYE/EYE WIREROPE SLINGS-SWC8FAB620 >
3/8" X 72" EYE/EYE WIREROPE SLINGS-SWC8FAB616 >
3/8" X 48" EYE/EYE WIREROPE SLINGS-SWC8FAB612 >
3/8" X 36" EYE/EYE WIREROPE SLINGS-SWC8FAB610 >
3/8" X 24" EYE/EYE WIREROPE SLINGS-SWC8FAB605 >
Recently Viewed
1-3/4" TO 2-3/4" DOOR REINFORCER - JWH205001 >
POLISHED BRASS SELF-CLOSING HINGE. 3/8" INSET-JWH213502 >
Browning 12-TOOTH #50-1 CHAIN SPROCKETS BRW H-5012 X 1-1/4
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
JASON 2RC75 2-GROOVE BANDED V-BELT, CLASSICAL SECTION BANDED. OUTSIDE LENGTH 79" TOP WIDTH 1-3/4" 17/32" THICK
THIS V-BELT IS MADE OF DURABLE MATERIALS AND CAN HOLD UP TO THE TOUGHEST CONDITIONS. IT'S DESIGNED TO DISTRIBUTE LOAD EVENLY AND PROVIDE A LONGER SERVICE-LIFE.
-JAS2RC75>
Milwaukee® 2966-22 M18 FUEL™ High Torque Impact Wrench, 1/2 in Drive Square Drive, 0 to 2700 ipm, 900 ft-lb Fastening/1100 ft-lb Nut-Busting Torque Rating, 7.3 in OAL
The MILWAUKEE® M18 FUEL™ ½” High Torque Impact Wrench w/ Pin Detent Kit delivers up to 900 ft-lbs of fastening torque, greater access in tight spaces, and greater durability. The POWERSTATE™ Brushless Motor delivers up to 900 ft-lbs of Fastening Torque and 1,100 ft-lbs of Nut-Busting Torque, providing users with greater power for the most demanding applications. At 7.3” in length, the compact size gives users greater access in tight spaces. The robust design allows users to tackle the most demanding applications on the jobsite all while prolonging tool performance. The patented battery isolation system ensures a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. The integrated lanyard loop allows users to easily transfer and store the tool. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½” Pin Detent anvil design maximizes socket retention. The M18 REDLITHIUM™ XC5.0 Resistant Batteries included provide increased protection against oils, greases, & solvents.
Size & System: 5/8" standard fractional SAE measurement. Wrench End Types: Combines a standard open end with an enclosed 12-point ratcheting box end. Reversible Selector: Built-in reversing lever on the low-profile box end to change ratcheting direction without flipping the tool. Precision Gear: Features a 72-tooth precision machined gear requiring only a 5-degree swing arc, making it highly effective for confined spaces. Ergonomics: Designed with a 12-degree offset angle on the box end to clear obstacles and safeguard your knuckles
