V-BELTS BANDED 3V-5V-8V
4-GRV BANDED 5-VX-1900 V-BELTS-DAYR5VX19004>
4-GRV BANDED 5-V-1320 V-BELTS-DAYR5V13204>
2-GRV BANDED 3-VX-750 V-BELTS-DAYR3VX7502>
PIX 5-V-1600/04 NARROW WEDGE WRAPPED INDUSTRIAL V-BELT, 160" OC, 4 BANDS
4-GRV BANDED 5-V-1600 V-BELT 160"-PIX5V1600/04 >
PIX 3-V-900/02 3/8" X 90" 3V SECTION WEDGE BANDED V-BELT
3V900/02 BANDED B BELT IS INTERCHANGEABLE WITH BELT NUMBERS 2-R3V900, R3V900-2 & 2/3V900. WEDGE BANDED V BELTS ARE ABLE TO PRODUCT HP RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. HIGH HP RATINGS IS ACHIEVED BY THE DIMENSIONAL CHANGES, SPECIAL TREATED POLYESTER CORD AS WELL AS OPTIMUM CORD PLACEMENT. BANDED V BELTS USE A SPECIAL HIGH STRENGTH TIE BAND THAT CREATES A PERMANENT MATCHED SET THROUGHOUT ALL BANDS, WHICH IMPROVES THE LOAD DISTRIBUTION.
-PIX3V900/02 >
JASON 8-V-1700 UNIMATCH BANDED DEEP WEDGE V-BELTS, 8V SECTION, NATUAL RUBBER, 170" LONG, 2 RIBS, 1" TOP WIDTH, 7/8" THICK
HIGH POWER CAPABILITY WITH A MORE COMPACE DRIVE, BANDED CONSTRUCTION OF FABRIC/NEOPRENE TOP BAND ENHANCES STABILITY AND PREVENTS BELTS FROM TURNING OVER OR COMING OFF OF THE DRIVE. OIL & HEAT RESISTANCT. THE CORD IS MADE OF POLYESTER, THE COVER OF COTTON /POLYESTER BLEND
-JAS8V1700>
JASON 5R5V1320 WEDGE BANDED V-BELT, 5/8 " TOP WD X 132" OL X 17/32" THICK, X5 BANDS
OIL AND HEAT RESISTANT, STATIC DISSIPATING. A RAW EDGE, COGGED CONSTRUCTION FURTHER INCREASES THE EFFECTIVE POWER TRANSMISSION OF DEEP WEDGE V-BELTS.
- JAS5R5V1320>
COGGED, 4 RIB 3/8" TOP WIDTH, 21/64" DEPTH, 90" OUTSIDE LENGTH 3/8" TOP WIDTH, SECTION 3VX.
-JAS4R3V900 >
JASON 3-V-830 RUBBER 83" RUBBER V-BELT. LENGTH X 0.38" WIDTH X 0.31" THICK
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. A MORE NARROW, DEEP WEDGE SHAPE WITH MORE EFFICIENT LOAD CARRYING CHARACTERISTICS AND HIGHER POWER CAPABILITY ALLOWS FOR SMALLER, MORE COMPACT DRIVES. THESE BELTS FEATURE THE UNIMATCH CONSTRUCTION. THIS ELIMINATED BELT SET MATCHING WITH ITS MULTIPLE STOCKING AND BELT WASTAGE PROBLEMS
-JAS3V830>
2-GRV BANDED B56 V-BELT-PIXB56/02>
8 GROOVE BANDED B50 V-BELTS-PIXB50/08>
2-GRV BANDED B-50 V-BELTS-PIXB50/02>
V-BELTS-PIX8V3350>
V-BELTS-PIX8V3000>
V-BELTS-JAS8V3000>
4-GRV BANDED 5-V-2800 V-BELTS-PIX5V2800/04>
V-BELTS-JAS8V2500>
V-BELTS-JAS8V2500>
V-BELTS-PIX8V2240>
5-GRV BANDED 8-V-2120 V-BELT 212"-PIX8V2120/05 >
V-BELTS-JAS8V2120>
12-GRV BANDED 8-V-2000 V-BELTS-PIX8V2000/12>
12-GRV BANDED 8-V-1900 V-BELTS-PIX8V1900/12>
8-GRV BANDED 8-V-1900 V-BELTS-PIX8V1900/08>
Recently Viewed
6-GRV BANDED 5-V-1800 V-BELT-JAS6R5V1800 >
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPTthreads.
Pressure to 150 P.S.I. at 70°F.
BALL IS DIAMOND TURNED, AFTER MOLDING, TO MAKE IT SPHERICALLY PERFECT. POLYPROPYLENE IS REINFORCED WITH FIBERGLASS FOR ADDITIONAL STRENGTH. PRECISION MOLDED IN POLYPROPYLENE. PTFE SELF-LUBRICATING STEM BUSHINGS AND SEATS CANNOT STICK OR BIND. SELF-ALIGNIING BALL MOVES FREELY AGAINST THE PTFE SEATS FOR SMOOTH OPERATION. STAINLESS STEEL BOLTS. VALVE OPENS AND CLOSES WITH VERY LITTLE PRESSURE ON THE HANDLE. MAXIMUM PRESSURE IS 225 PSI
-BAJV400 >
DOUBLE OPEN FACE BALL BEARING - NTN6018>
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi
DRUM PUMP NOZZLES ARE FLOW CONTROL DEVICES THAT CONNECT TO THE END OF A DRUM PUMP DISCHARGE HOSE. THEY HAVE A SPOUT WHERE FLUID EXITS THE NOZZLE AND A TRIGGER CONTROL FOR STARTING, STOPPING, AND REGULATING THE RATE OF THE FLOW. THESE NOZZLES MINIMIZE PRODUCT WASTE AND REDUCE WEAR ON PUMP MOTORS BY ALLOWING FLOW TO BE CONTROLLED WITHOUT HAVING TO TURN THE PUMP ON & OFF. THEY ARE COMMONLY USED FOR DISPENSING FUELS AND AUTOMOTIVE FLUIDS
BAJVA200 >
