Negative Air Machine Accessories
581364 DO IT BEST/SEACHOICE USCG METAL 110 DB SIGNAL HORN
ECO-FRIENDLY, USCG APPROVED SIGNALING DEVICE FOR BOATS UP TO 65' LONG NO REPLACEMENT CANS OR CHEMICALS
-JWH581364>
581860 DO-IT-BEST/HWI PRODUCTS
8-OZ REFILL CANISTER FOR AIR HORN-JWH581860 >
581879 DO-IT-BEST/HWI PRODUCTS
HAND-HELD AIR HORNS WITH CANISTER-JWH581879 >
581887 DO-IT-BEST/HWI PRODUCTS
HAND-HELD AIR HORNS WITH CANISTER-JWH581887 >
Recently Viewed
DRILLCO 21N124CP 2100N Spiral Point Tap, Right Hand Cutting, 3/8-16 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Oxide Treated, HSS
Nitro Spiral Point CNC Machine Taps. The angular flutes at the front end of these taps propel the chips ahead of the tap. This reduce loading and clogging in the flutes. Spiral Point taps are ideal for production tapping thru holes.
DRILLCO 215N100A 2150N Spiral Point Tap, Right Hand Cutting, M10x1.5 Thread, D6 Thread Limit, Plug Chamfer, 3 Flutes, Oxide Treated, M35 HSS-Co
Nitro-Max ANSI/ANSI taps are produced with a reduced neck to allow for longer reach, improved coolant flow, and easier chip evacuation. These taps offer higher heat resistance and red hardness over conventional High Speed Steel taps. For CNC applications.
COMMAND PICTURE HANGING FASTENER-JWH626790>
Eklind® 21172 Classic Short Key Set, 7 Pieces, 2 to 8 mm Hex, Torx® Drive, Foldable Handle, ANSI B18.3, Black Oxide
Eklind® 21172 Classic Short Key Set, 7 Pieces, 2 to 8 mm Hex, Torx® Drive, Fold-Up Handle Handle, ANSI B18.3, Black Oxide
DRILLCO 21PS160B 2100PS Super High Performance Spiral Point Tap, Right Hand Cutting, M16x1.5 Thread, D6 Thread Limit, Plug Chamfer, 3 Flutes, Uncoated, HSS
These taps are designed for machine tapping in a wide range of material groups, including difficult to machine materials such as stainless steel. The Nitro multi-application spiral point tap improves thread quality, and aids in chip evacuation.
Armstrong® 11-011 Standard Length Socket, 3/8 in Square Drive, 11/32 in, 6 Points
