QD SPROCKETS
15-TOOTH H-BUSHING #50 CHAIN SPROCKET - IDCH50H15>
16-TOOTH H-BUSHING #50 CHAIN SPROCKET - IDCH50H16>
15 TOOTH SPROCKETS FOR #50 CHAIN-BRWH50JA15 >
16 TOOTH SPROCKETS FOR #50 CHAIN-BRWH50JA16 >
11 TOOTH SPROCKETS FOR #60 CHAIN-BRWH60JA11 >
13 TOOTH SPROCKETS FOR #60 CHAIN-BRWH60JA13 >
17 TOOTH SPROCKETS FOR #60 CHAIN-BRWH60SDS17 >
18 TOOTH SPROCKETS FOR #60 CHAIN-BRWH60SDS18 >
15 TOOTH SPROCKETS FOR #60 CHAIN-BRWH60SH15 >
16 TOOTH SPROCKETS FOR #60 CHAIN-BRWH60SH16 >
26 TOOTH SPROCKETS FOR #60 CHAIN-BRWH60SK26 >
27 TOOTH SPROCKETS FOR #60 CHAIN-BRWH60SK27 >
14 TOOTH SPROCKETS FOR #80 CHAIN-BRWH80SDS14 >
15 TOOTH SPROCKETS FOR #80 CHAIN-BRWH80SK15 >
19 TOOTH SPROCKETS FOR #80 CHAIN-BRWH80SK19 >
-IDC35JA32 >
Recently Viewed
2-GRV A-BELT H-BUSH SHEAVES-IDC2AK032H >
5/16" X 3" USS SOCKET SET SCREWS-NBS7190320300 >
Milwaukee® 48-27-0811 Flat Boring Bit, 13/16 in Dia, 6-1/8 in OAL, Flat Flute, 1/4 in Shank
Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee® 13/16 in. x 6 in. flat boring bit. This premium quality flat boring bit is made of heat-treated high carbon steel, so the drill point and cutting edge can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and Formica. This bit offers a 6 in. drilling depth but can be used with a 12 in. extension (48-28-3350) for extended deep-hole drilling.
Proto® TorquePlus™ J5414H Standard Length Socket, Imperial, 1/2 in Square Drive, 7/16 in
Forged in the USA from select US alloy steel to withstand high-leverage and heavy loads
Extra heavy-duty head area gives maximum strength and durability
Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding
Extra-large hub area works on larger diameter holes than other wrenches
Catalog number, bolt size and nominal opening size are stamped on every wrench for easy identification
American Bridge design
MORSE® 11056 1322 General Purpose Taper Length Drill, #55 Drill - Wire, 0.052 in Drill - Decimal Inch, 3 in OAL, HSS, Black Oxide
