A-B-C-D-E SHEAVES
2-GRV FINISHED BORE SHEAVE 1" BORE-BRW2BK32X1 >
2-GRV FINISHED BORE SHEAVE 1/2" BORE-BRW2BK32X1/2 >
2-GRV FINISHED BORE SHEAVE 3/4" BORE-BRW2BK32X3/4 >
2-GRV FINISHED BORE SHEAVE 7/8" BORE-BRW2BK32X7/8 >
2-GRV FINISHED BORE SHEAVE 1-1/8" BORE-BRW2BK34X11/8 >
2-GRV FINISHED BORE SHEAVE 5/8" BORE-BRW2BK34X5/8 >
2-GRV FINISHED BORE SHEAVE 7/8" BORE-BRW2BK34X7/8 >
2-GRV FINISHED BORE SHEAVE 1-1/8" BORE-BRW2BK36X11/8 >
2-GRV FINISHED BORE SHEAVE 1-3/8" BORE-BRW2BK36X13/8 >
2-GRV FINISHED BORE SHEAVE 3/4" BORE-BRW2BK36X3/4 >
Bushed Classical Gripbelt Sheave, 4L or A, 5L or B Belt, 2 Grooves, Uses H Bushing
Largest Selection of H Bushed sheaves of any other manufacturer - Browning offers bushed sheaves in both A & B Combination (A/B) configuration. 1, 2 & 3 Grooves are available to meet any fractional horsepower requirement.
Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance.
Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible.
Combination Groove - All Browning BK H Sheaves permit the running of A, 4L, B & 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers.
Type: Classical Gripbelt Sheave
Bore Size: 1 1/2
Bushing Used: H
Type of Bore: Bushed
V-Belt Pulley - 4L, 5L, A, B Belt Section, 2 Groove, 1 in Bore Size, 3.9500 in O.D., Finished Bore, Not Required Series Bushing, Cast Iron Material
2-GRV FINISHED BORE SHEAVE 1-1/8" BORE-BRW2BK40X11/8 >
2-GRV FINISHED BORE SHEAVE 7/8" BORE-BRW2BK40X7/8 >
2-GRV CAST IRON SHEAVE WITH SPLIT TAPER BUSHING 4.45" X 1-3/4"-BRW2BK47H >
2-GRV FINISHED BORE SHEAVE 1-3/8" BORE-BRW2BK52X13/8 >
2-GRV CAST IRON SHEAVE WITH SPLIT TAPER BUSHING 5.25" X 1-3/4"-BRW2BK55H >
2-BK-62-H 4 Groove Cast Iron Sheave With Split Taper Bushing 5.95" X 1-3/4"
4 GROOVE CAST IRON SHEAVE WITH SPLIT TAPER BUSHING 5.95" X 1-3/4"-BRW2BK62H >
2-BK-65-H 5 Groove Cast Iron Sheave With Split Taper Bushing 6.25" X 1-3/4"
5 GROOVE CAST IRON SHEAVE WITH SPLIT TAPER BUSHING 6.25" X 1-3/4"-BRW2BK65H >
2-GRV C-BELT QUICK DISCONNECT SF-BUSH SHEAVES-IDC2C110SF >
2 Groove C Belt Section Cast Iron Bushed Bore Multiple Sheave, QD Bushed, 8.4" Outside Diameter
2-GRV A-BELT H-BUSH SHEAVES
2-GRV A-BELT H-BUSH SHEAVES
2-GRV A-BELT H-BUSH SHEAVES
Recently Viewed
Gates® Power Transmission Super HC® PowerBand® 5/5V1320 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 132 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
3/4" SEALED CAM FOLLOWER-MCGCF3/4SB >
PIX BX-90 IS A COGGED, CLASSICAL V-BELT 93" OUTSIDE LENGTH, 21/32" TOP WIDTH, 13/32 IN THICKNESS
COGGED V-BELTS ALLOWS FOR SMALLER SHEAVE SIZES AND INCREASED POWER TRANSMISSSION CAPABILITIES. THE FIBER LOADED COGGED CONSTRUCTION PROVIDES OPTIMUM FLEXIBILITY AND MINIMIZES HEAT BUILD UP. PRECISION MOLDED RAW EDGE COGGED CONSTRUCTION TRANSFERS MORE POWER WITH MUCH GREATER EFFICIENCY. STABILITY IS ASSURED BY USING STOCK THAT MAINTAINS CORD INTEGRITY, ASSURING UNIFORM DISTRIBUTION OF LOAD TRANSMISSION.
-PIXBX90 >
Browning® Gearbelt® 1054600 Type 1 Synchronous Timing Pulley With Flange, 1/2 in Finished Bore, 1.641 in OD, 14 Grooves, 1.671 in Dia Pitch, 1 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
