OIL SEALS
Recently Viewed
Precision Brand® 16A3 Shim Stock, 1008-1010 Full Hard Steel, 100 in Roll L x 6 in W x 0.003 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
R134A SNAP-A-CAN GREEN-PRI8013J>
6_100x100.jpg)
4-SQ/FT CHAMOIS-JWH582006>
Krylon® Tough Coat® A01210007 Acrylic Enamel Spray Paint, 12 oz Container, Liquid Form, Safety Orange, 20 to 25 sq-ft Coverage
Tough Coat® provides the ultimate in durability and protective finishes. This high solids formula ensures maximum coverage and performance. Tough Coat® acrylic Enamels features our exclusive EZ Touch® FANSPRAY® Nozzle. This patented valve sprays a horizontal or vertical pattern and requires 50% less finger pressure than any other paint valve. A high solids formula ensures maximum coverage and performance. Tough coat delivers the ultimate in protection, durability, high gloss and color retention.
Krylon® 2012 Color Paint, 16 oz Container, Liquid Form, Safety Green, 20 to 25 sq-ft Coverage
Krylon® 2012 Color Paint, 16 oz Container, Liquid Form, Safety Green, 20 to 25 sq-ft Coverage
Precision Brand® 16AA25 Shim Stock, 1008-1010 Full Hard Steel, 120 in Roll L x 12 in W x 0.025 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
