OIL SEALS
.500" X .999" X .250" RADIAL SHAFT SEAL WITH SPRING, NITRILE RUBBER LIP MATERIAL, SKF WAVE SEAL.
.500" X .999" X .250" DOUBLE LIP OIL SEAL, SKF WAVE LIP AND AUXILIARY, CONTACTING LIP OIL & GREASE
.500" X .999" X .250" RADIAL SHAFT DOUBLE LIP SOLID OIL SEAL
5.000" X 6.001" X .500" RADIAL SHAFT, DOUBLE LIP SOLID OIL SEAL
.500" X 1.017" X .204" OIL SEAL - CHI5008>
OIL SEALS-5.000" X 6.375" X .500"-CHI50138>
1.500" X 2.000" X .281"NITRILE OIL SEAL, SOLID, SC DESIGN, NITRILE RUBBER LIP MATERIAL
OIL SEALS-2.250" X 2.750" X .281"-HYDRAULIC/PNEUMATIC SHAFT SEAL
.500" X 1.124X.250" RADIAL SHAFT SEAL WITH METAL CASE, SKF WAVE LIP AND AUXILIARY, CONTACTING LIP OIL SEAL.
.500" X 1.124" X.250" OIL SEAL SINGLE LIP SHAFT SEAL WITH SPRING. NITRILE RUBBER LIP MATERIAL, SKF WAVE SEAL.
5.118" X 6.299" X .472" CRW1 DESIGN, SINGLE LIP
Single Lip Shaft Seal with Spring
5.25 in Shaft Diameter
6.5 in Housing Bore
0.5 in Overall Width
Nitrile Rubber (NBR) Lip Material
SKF Wave Seal
1.312" X 2.062" X .315" RADIAL SHAFT, DOUBLE LIP SOLID, OIL SEAL
OIL SEALS-1.375" X 2.047" X .276" RADIAL SHAFT DOUBLE LIP SOLID OIL SEAL. FLUORO RUBBER MATERIAL, CRWA1 DESIGN.
.551" X 1.024" X .276" METRIC M.O.D. GREASE SEALS
.551" X .945" X .236" WAVE SEALS, DESIGNED FOR PERFORMANCE TESTED FOR QUALITY.
.551" X .984" X .276" METRIC OIL SEALS
2.500" X 3.500" X .375" FLUORO RUBBER DUAL LIP SHAFT SEAL, FLOUROCARBON RUBBER LIP MATERIAL, SKF WAVE SEAL.
2.063" X 2.875" X .375" DUAL LIP SHAFT SEAL WITH SPRING. NITRILE RUBBER LIP MATERIAL
1.575" X 2.441" X .453" LTD OIL SEAL RUBBER SINGLE LIP WITH SPRING
OIL SEAL
5-1/2 IN ID
7-1/2 IN OD
NITRILE
Chicago Rawhide (SKF) Radial Shaft Seal 5569
Single Lip Grease Seal - Solid
0.563" Shaft
0.999" Outside Diameter
0.219" Width
Nitrile Rubber Material
HM14 Design
OIL SEALS-2.165" X 2.835" X .393"-CHI55X72X10HMSA10R>
CR (SKF) Radial Shaft Seal 5605
by SKF
$8.56
4 IN STOCK
Chicago Rawhide (SKF) Radial Shaft Seal 5605
Single Lip Oil Seal - Solid
0.554" Shaft
0.999" Outside Diameter
0.250" Width
Nitrile Rubber Material
CRW1 Design
Recently Viewed
ISOSTATIC™ Century® 104233 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 1 in OD, 1-1/2 in W
ISOSTATIC™ Century® 104233 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 1 in OD, 1-1/2 in W
INS-SCM-208 Dodge® 123362 214 Medium Duty Set Screw Ball Bearing, 2-1/2 in Dia Bore, 4.9213 in OD, 2.54 in W, 13995 lb Dynamic/9838 lb Static Load
INS-SCM-208 Dodge® 123362 214 Medium Duty Set Screw Ball Bearing, 2-1/2 in Dia Bore, 4.9213 in OD, 2.54 in W, 13995 lb Dynamic/9838 lb Static Load
NIBCO 1817-012 45 deg Elbow, 1-1/4 in, Slip, SCH 80/XH, CPVC, FKM O-Ring Seal, Domestic
45 deg Elbow, 1-1/4 in, Slip, SCH 80/XH, CPVC, FKM O-Ring Seal, Domestic
Dichtomatik N70114 O-Ring, 114 Dash Number, 0.612 in ID x 0.818 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Quantum® QSB103YL Economy Shelf Bin, 17-7/8 in L x 4-1/8 in W x 4 in H, 0.11 cu-ft, Yellow
10-OZ 300-ML BLACK RTV SEALANT-DOW739>
