OIL SEALS
TCM11243SB>
TCM112432SL>
OIL SEALS-1.125" X 1.938" X .343"-IMS11269>
1.125" X 1.938" X .625" OIL SEAL-CHI11284 >
OIL SEAL-NAT1129>
1.125" X 1.983X.250" OIL SEAL-CHI11299 >
1.125" X 2.000" X .250" OIL SEAL-CHI11334 >
OIL SEALS-1.125" X 2.000" X .375"-IMS11343>
1.125" X 2.000" X .250" OIL SEALS-CHI11344 >
1.125" X 2.047" X .250" OIL SEAL-CHI11352 >
OIL SEALS-1.125" X 2.062" X .250"-CHI11365>
OIL SEALS-1.125" X 2.062" X .250"-CHI11368>
1.125" X 2.250" X .250" OIL SEALS-CHI11378 >
OIL SEALS-1.125" X 2.250" X .250"-IMS11378>
1.125" X 2.835" X .375" OIL SEAL-CHI11405 >
TCM115X140X13TC>
TCM115X145X14TC>
1.156" X 1.686" X .312" OIL SEALS-CHI11513 >
1.156X1.752X.250" OIL SEAL-CHI11514 >
OIL SEALS-1.156" X 1.752" X .250"-IMS11514>
IMPORT OIL SEALS-IMS11515>
TCM115162TB>
1.156" X 1.686" X .312" OIL SEALS-TCM115163TC >
TCM115172TL>
Recently Viewed
TCM10X18X5SC>
Mayhewâ„¢ 22017 PROâ„¢ Reg Line-Up Punch, 3/8 in Hex Punch, 15 in OAL, Steel
GEARBELT, DOUBLE 255 TEETH, 30MM WIDE, 8 MM PITCH, 2400-MM LONG. TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER IN COST. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
JASD24008M30 >
BELT MATERIAL-JASL8M30URS>
JASON 3843M15 HTB TIMING BELT, SINGLE SIDED, 3MM PITCH, 384 MM PITCH LENGTH, 128 TEETH
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS3843M15 >
JASON 960-8-M-20 8-MM PITCH X 20-MM TOP WIDTH X 960-MM OUTSIDE CIRCUMFERANCE; 120 TEETH
TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-JAS9608M20>
