OIL SEALS
TCM10X17X3VG>
TCM10X18X5SC>
TCM10X19X7TC>
TCM10X20X6TC>
TCM10X24X7TC>
TCM10X26X7TC>
SPLINE YOKES-7/8"-13-CHI10-4481>
1"-ID ROUND BORE/ID YOKE-CHI104573>
10.00" X 11.00" X .375" OIL SEAL - CHI100042
TCM100141KC>
TCM100142SC>
TCM100142VTLH>
TCM100142VZ>
TCM100142SM>
TCM100182TBH>
1.000" X 1.781" X .469" OIL SEAL-CHI10035 >
1.000" X 1.828" X .250" OIL SEAL-CHI10050 >
OIL SEALS-1.828" X 1.832" X .25"-CHI10058>
1.000" X 1.874X.250" OIL SEAL-CHI10075 >
3.937" X 4.724" X .394" OIL SEAL - TCM100X120X10TC>
3.937" X 5.118" X .472" OIL SEALS-TCM100X130X12TC >
3.937" X 5.512" X .512" OIL SEAL - TCM100X140X13TC>
1.000" X 1.938" X .250" OIL SEAL-CHI10104 >
1.000" X 1.983X.250" OIL SEAL-CHI10111 >
Recently Viewed
TCM10X18X5SC>
Mayhewâ„¢ 22017 PROâ„¢ Reg Line-Up Punch, 3/8 in Hex Punch, 15 in OAL, Steel
GEARBELT, DOUBLE 255 TEETH, 30MM WIDE, 8 MM PITCH, 2400-MM LONG. TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER IN COST. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
JASD24008M30 >
BELT MATERIAL-JASL8M30URS>
JASON 3843M15 HTB TIMING BELT, SINGLE SIDED, 3MM PITCH, 384 MM PITCH LENGTH, 128 TEETH
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS3843M15 >
JASON 960-8-M-20 8-MM PITCH X 20-MM TOP WIDTH X 960-MM OUTSIDE CIRCUMFERANCE; 120 TEETH
TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-JAS9608M20>
