OIL SEALS
OIL SEALS-NAT19799>
2.000" X 2.716" X .375" OIL SEAL-CHI19786 >
OIL SEALS-2.000" X 2.716" X .375"-IMS19785>
2.000" X 2.716" X .375" OIL SEAL-CHI19785 >
2.000" X 2.686X.250" OIL SEAL-CHI19783 >
OIL SEALS-2.000" X 2.623" X .640"-IMS19776>
OIL SEALS-2.000" X 2.652" X .365"-IMS19773>
OIL SEALS-NAT19773>
OIL SEALS-2.000" X 2.635" X .234"-IMS19770>
2.000" X 2.635" X .234" OIL SEALS -CHI19770 >
OIL SEALS-2.000" X 2.627" X .234"-IMS19768>
2.000" X 2.623" X .250" OIL SEALS -CHI19763 >
OIL SEALS-2.000" X 2.623" X .313"-IMS19760>
OIL SEALS-2.000" X 2.565" X .500"-CHI19757>
OIL SEALS-2.000" X 2.565" X .500"-IMS19757>
2.000" X 2.502" X .313" OIL SEAL-CHI19745 >
OIL SEALS-2.000" X 2.622" X .280"-IMS19743>
1.969" X 2.960" X .250" OIL SEAL - CHI19660>
OIL SEALS-1.969" X 2.953" X .315"-IMS19654>
1.969" X 2.953X.315" OIL SEAL-CHI19654 >
OIL SEALS-NAT19643>
1.969" X 2.875" X .469" OIL SEAL-CHI19643 >
1.969" X 2.835" X .315" OIL SEAL-CHI19640 >
1.969" X 2.756" X .315" OIL SEALS
Recently Viewed
Drillco 31E140CC 3100E Adjustable Round Split Die, M14x1.5 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
DOUBLE SHIELDED BALL BEARING-GUL60112Z >
5/16" X 3/4" SAE Stainless Steel Hex Head Capscrew
BRAZING ALLOY A brazing alloy that is ideal for large and small copper tubing installations. Self-fluxing on copper. Typical applications include: Refrigeration control valves (copper and brass), joining copper wires to rotor bars, electrical connections, radiant heating systems, air conditioning units, hot and cold water lines, and heat exchanges. T-joints, swage joints and sleeves, couplings on return bends and condenser fittings. Sil-Flo is not recommended for ferrous metals such as iron or steel. It is only for copper base metals as an effective economical alternative to copper-silver alloy rods.
10 TOOTH SPROCKETS FOR #41 CHAIN-BRW4110X5/8 >
SPIRAL LACQUERED SPRING STEEL COMB. TEETH ON 1 SIDE ARE SMOOTHLY ROUNDED FOR THIN COATED ANIMALS, FOR OTHERS ARE THE PITCH TYPE SHARP TEETH FOR THICK OR SHEDDING COATS. THE SPIRAL IS CONSTRUCTED OF 1 CONTINUOUS STRIP OF QUALITY SPRING STEEL COMBINING FLEXIBILITY WITH STRENGTH. COMBS ARE ASSEMBLED WITH LEATHER SPACERS AND RIVETED TOGETHER. A TENSION SPRING SNUGS THE COMB FIRMLY ON THE METAL SHANK PIN. COMBS ARE LACQUER-DIPPED TO GIVE THEM A BRIGHT DURABLE FINISH.
- JWH752938>
