PILLOW BLOCK UNITS
PILLOW BLOCKS-DOD023188>
2-3/16"-ID SPLIT PILLOW BLOCK UNIT - DOD023339>
EXPANSION-DOD023386>
1-1-1/16" PILLOW BLOCK UNIT-DOD044615 >
1-1-1/16" PILLOW BLOCK UNIT-DOD044643 >
2-15/16"-ID TRB SPLIT PILLOW BLOCK - DOD065296>
1-15/16" PILLOW BLOCK UNIT-DOD066218 >
1-11/16" PILLOW BLOCK UNIT - DOD066252 >
1-15/16" PILLOW BLOCK UNIT-DOD066254 >
3-7/16"-ID 4-BOLT PILLOW BLOCK - DOD070389>
PILLOW BLOCKS-DOD123813>
2-15/16"-ID 2-BOLT PILLOW BLOCK UNIT - DOD123823>
1-1/2" TAPPED BASE PILLOW BLOCK-DOD129285 >
PILLOW BLOCK FLANGES (SET)-IBI40PBST>
47-MM-OD PILLOW BLOCK FLANGE (SET)-IBI47PBST>
52-MM PILLOW BLOCK FLANGES (SET)-IBI52PBST>
Bore Size: 1-1/4 inch Housing Type: 2-bolt split housing pillow block Lining: Babbitt lined
AI Mode Conversation: Royersford 60020104royersford 60020104 (also formatted as 60-02-0104) is a specific industrial part number for a split journal bearing pillow block manufactured by the Royersford Foundry & Machine Company. Product Specifications Bore Size: 1-1/4 inch Housing Type: 2-bolt split housing pillow block Lining: Babbitt lined
The Royersford 60020104 (also written as 60-02-0104) is an industrial split journal pillow block bearing manufactured by the Royersford Foundry and Machine Company. It features a 1-1/4 inch bore and a babbitt-lined split housing. These parts are commonly sourced as new surplus or replacement parts for legacy industrial equipment.
1-15/16" 2-BOLT SPLIT HOUSING PILLOW BLOCK
Manufacturer: Royersford Foundry & Machine Company Bore / Shaft Size: 1-7/16 inches Housing Type: 2-bolt split housing mechanical pillow block Application: Industrial mechanical power transmission systems
1-11/16" 2-B SPLIT HOUSING PILLOW BLOCK-ROY60020111 >
1-3/4" 2-B SPLIT HOUSING PILLOW BLOCK-ROY60020112 >
1-15/16" 2-B SPLIT HOUSING PILLOW BLOCK-ROY60020115 >
Recently Viewed
Proto® JSF155 Soft Face Hammer, 12 in OAL, 1-1/2 in, 1 to 2.9 in Face Range, 1.02 lb Replaceable Face, Fiberglass Handle
MORSE® 32725 2046 Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H4 Thread Limit
P-2-BSD-111-E Dodge® 066252 111 Special Duty Pillow Block Roller Bearing Unit, 1-11/16 in Dia Bore, 7.56 to 7.94 in L Bolt Center-to-Center, 3.13 in Base to Bore Centerline, 9-1/2 in OAL x 6.81 in OAH
Dodge® special duty double row tapered roller bearings have the highest capacity of all Dodge® tapered roller bearings. they carry heavy radial loads and combined radial and thrust loads. The maximum recommended load which can be applied is limited by various components in the system such as bearing, housing, shaft, shaft attachment, speed and life requirements. Dodge® special duty tapered roller bearings have been applied successfully even when these limits have been exceeded under controlled operating conditions.
Milwaukee® M18 FUEL™ 2857-22 Cordless Impact Driver Kit, 1/4 in Hex Drive, 4300 bpm, 2000 in-lb Torque, 18 V, 4.59 in OAL
Our M18™ FUEL™ 1/4 in impact driver with ONE-KEY™ XC kit is the fastest, most compact and most powerful tool in its class. The POWERSTATE™ brushless motor produces up to 2000 in-lb of torque, delivering up to 30% faster driving speed, increasing the impact drills productivity for the most demanding fasteners on the job. At only 4.59 in L, this is the most compact impact driver in its class, giving you better access in tight spaces. REDLINK™ Plus™ intelligence tool technology ensures maximum performance while protecting from overloads, heating and over discharge. Our included M18™ REDLITHIUM™ XC5.0 battery packs deliver more work per charge and more work over the life of the packs than competitors. With ONE-KEY™, you gain the ability to customize, track and manage your hex impact driver. ONE-KEY™ technology also allows you to save up to 4 task settings directly to the tool. Self-tapping screw mode provides faster installation time, shutting the hex driver down as soon as the fastener is seated to reduce damage to fasteners and materials. If your tool is ever lost or stolen, its tracking functionality can lock it out to protect your investment.
Milwaukee® M18™ FUEL™ 2853-22 Cordless Impact Driver Kit, 1/4 in Hex Drive, 4300 bpm, 2000 in-lb Torque, 18 V DC, 4.59 in OAL
The M18™ FUEL™ 1/4 in hex impact driver is the fastest, most compact and most powerful tool in its class. The POWERSTATE™ brushless motor delivers upto 2000 in-lb of torque and upto 30% faster driving speed, increasing user productivity for the most demanding fasteners on the job. At only 4.59 in L, this is the most compact tool in its class, allowing users to have more access in tight spaces. The REDLINK™ Plus™ intelligence ensures maximum performance and protects from overloads, heating and or over-discharge. The REDLITHIUM™ battery pack delivers more work per charge and more work over the life of the pack when compared to competitors. The 4-Mode DRIVE CONTROL™ provides greater control over output speed and power, for greater versatility. The self-tapping screw mode provides faster installation time by reducing stripping of fasteners.
BIN STORAGE CABINETS (48 CU/FT) -KNA129 >
