JAW COUPLING
CHJS-6X3/4 3/4" -ID Jaw Type Coupling 3-7/16" X 5" X 3/4"
3/4" -ID JAW TYPE COUPLING 3-7/16" X 5" X 3/4"-BRWCHJS6X3/4 >
CHJS-6X7/8 7/8" -ID Jaw Type Coupling 3-7/16" X 5" X 7/8"
7/8" -ID JAW TYPE COUPLING 3-7/16" X 5" X 7/8"-BRWCHJS6X7/8 >
CHJS-7X1-1/8 1-1/8" -ID Jaw Coupling 4-1-1/16" X 6-3/16' X 1-1/8"
1-1/8" -ID JAW COUPLING 4-1-1/16" X 6-3/16' X 1-1/8"-BRWCHJS7X11/8 >
CHJS-7X1-5/8 1-5/8" -ID Jaw Coupling 4-1-1/16" X 6-3/16" X 1-5/8"
1-5/8" -ID JAW COUPLING 4-1-1/16" X 6-3/16" X 1-5/8"-BRWCHJS7X15/8 >
CHJS-7X2-1/8 2-1/8" -ID Jaw Coupling 4-1-1/16" X 6-3/16" X 2-1/8"
2-1/8" -ID JAW COUPLING 4-1-1/16" X 6-3/16" X 2-1/8"-BRWCHJS7X21/8 >
L-035X1/4 " L" Jaw Type Coupling With 1/4"
" L" JAW TYPE COUPLING WITH 1/4" BORES-BRWL035X1/4 >
L-035X1/8 " L" Jaw Type Coupling With 1/8"
" L" JAW TYPE COUPLING WITH 1/8" BORES-BRWL035X1/8 >
L-035X3/8 " L" Jaw Type Coupling With 3/8"
" L" JAW TYPE COUPLING WITH 3/8" BORES-BRWL035X3/8 >
L-035X5/16 " L" Jaw Type Coupling With 5/16"
" L" JAW TYPE COUPLING WITH 5/16" BORES-BRWL035X5/16 >
L-050-HYT-SOX Jaw Coupling Hytrel
JAW COUPLING HYTREL INSERTS/SPIDER-LOVL050HYTSOX>
L-050X1/2 1/2" -ID Jaw Coupling Half
1/2" -ID JAW COUPLING HALF WITH KEYWAY-LOVL050X1/2 >
Recently Viewed
KEVLAR V-BELTS-PIXA71K>
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE-PIXAX91 >
Inner Diameter (ID): 60 mm (2.36 inches) Outer Diameter (OD): 110 mm (4.33 inches) Width: 22 mm (0.87 inches) Load Rating: Basic dynamic load rating of 56.1 kN and basic static load rating of 42.5 kN Limiting Speed: Up to 6000 rpm (oil) or 6700 rpm Design: Utilizes filling slots to accommodate higher radial loads than standard deep groove bearings
14.4-V 4-GALLON BACKPACK SPRAYER-VALBPSREV401>
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB112K>
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES . IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA52K>
