COUPLING HALVES
L-099X102-K 1-1/8" -ID Jaw Coupling
1-1/8" -ID JAW COUPLING HALVES-IDCL099X102K >
L-100X19-MM 19-mm-ID Jaw Coupling Half
19-MM-ID JAW COUPLING HALF - IDCL100X19MM>
L-100X9-SPLINE 9-spline Tooth Jaw Coupling
9-SPLINE TOOTH JAW COUPLING HALFS-LOVL100X9SPLINE>
L-110X103-K 1-3/16" -ID Jaw Coupling
1-3/16" -ID JAW COUPLING HALVES-IDCL110X103K >
L-110X106-K 1-3/8" -ID Jaw Coupling
1-3/8" -ID JAW COUPLING HALVES-IDCL110X106K >
L-150 1-3/16"-ID Jaw Coupling Halfs-lovl150x1.
1-3/16"-ID JAW COUPLING HALFS-LOVL150X1.3/16>
L-225X204-K 2-1/4" -ID Jaw Coupling
2-1/4" -ID JAW COUPLING HALVES-IDCL225X204K >
Recently Viewed
GEARWRENCH 90-tooth reversible ratcheting wrench swing arc of just 4° turns fasteners in extremely tight spaces. Longer, wider beam delivers improved reach, leverage, and comfort. Large color-coded SAE/metric markings make size identification easy. All exceed ASME performance specs and come with the trusted GEARWRENCH Full Lifetime Warranty.
Square Dâ„¢ 8910DPA32V02 8910DPA Electro-Mechanical Type DPA 1-Phase Electromechanical Definite Purpose Contactor, 110/120 V AC V Coil, 30 A, 2NO Contact, 2 Poles
8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This two pole definite purpose contactor has a full load rating of 30 ampere and a resistive rating of 40 amperes. It also has a 2 HP at 115 VAC single phase, 5 HP at 230 VAC single phase and 10 HP at 230 VAC three phase, 15 HP at 460 VAC three phase and 20 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 110/120 VAC 50/60 Hz coil. The contactor has straight through wiring. Contactor is 3.75 inches by 2.37 inches and 3.00 tall. These contactors are UL component recognized and CSA certified.
Drillco 175F1127 1750 Screw Anchor Imperial Masonry Drill, 3/16 in Drill Bit, SDS-Plus Shank, 4-1/8 in D Cutting, Carbide Cutting Edge, 7 in OAL
Hex shaft for attachment to sleeve driver to drive tapcon® screws.
CPVC BUSHINGS-NIB1838292>
AC-5.5 ADHESIVE ANCHORING SYSTEM-PWR8462 >
1/2" X 3-1/2" BLACK DOWEL PINS-HOL01142>
