TL-STYLE BUSHING
4040-75-MM 75-mm-ID 4040-style Taper-lock Bushing
75-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404075MM >
4040-80-MM 80-mm-ID 4040-style Taper-lock Bushing
80-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404080MM >
4040-85-MM 85-mm-ID 4040-style Taper-lock Bushing
85-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404085MM >
4040-90-MM 90-mm-ID 4040-style Taper-lock Bushing
90-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404090MM >
4040-95-MM 95-mm-ID 4040-style Taper-lock Bushing
95-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404095MM >
BROWNING 1008X5/8 5/8"-ID 1008-style Taper-lock Bushing
Mfr description
1008 X 5/8 TAPER BORE BUSHING
Mounts flush in products - No protruding flanges to interfere with the drive
Key to Key Drive - Cap screws act as an external key
1 1/2"/ft. Taper on Barrel - Since this is a non-self-locking taper it provides ease of installation and removal of products from the shaft.
Recently Viewed
2 GROOVE BANDED B-50 V-BELT-GAT2/B50 >
1/8" X 1/2" X 72" FLAT STEEL STOCK A36 mild carbon steel alloy. Common structural steel in U.S.A. Minimum yield of 36,000 PSI (250 MPa) and ultimate tensile strength of 58,000 to 80,000 PSI (400-550 MPa).
MORSE® 58947 5967 Center Cutting High Performance Regular Length Single End End Mill, 3/4 in Dia Cutter, 1/8 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL, Bright
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Linn 4M24-1.500 Plain Bore Miter Gear, 4 Diametral Pitch, 20 deg Pressure Angle, 24 Teeth, 6 in Dia Pitch, 1.33 in W Face, 1-1/2 to 2-5/8 in Dia Bore, Steel
GP® 4941M Standard Length Socket Driver Bit, 1 in Hex Drive, 41 mm, 20 mm L Bit
