V-BELTS COGGED BANDED AX-BX-CX-DX
5-GROOVE BANDED BX-53 V-BELT - PIXBX53/05>
4-GROOVE BANDED BX-53 V-BELT - PIXBX53/04>
3-GROOVE BANDED BX-53 V-BELT - PIXBX53/03>
2-GROOVE BANDED BX-53 V-BELT - PIXBX53/02>
NOTCHED GRIP V-BELT-JASBX33>
NOTCHED GRIP V-BELTS-JASBX156>
NOTCHED GRIP V-BELTS-JASBX133>
NOTCHED GRIP V-BELTS-PIXPX126>
NOTCHED GRIP V-BELTS-PIXBX124>
COGGED V-BELTS ALLOWS FOR SMALLER SHEAVE SIZES AND INCREASED POWER TRANSMISSSION CAPABILITIES. THE FIBER LOADED COGGED CONSTRUCTION PROVIDES OPTIMUM FLEXIBILITY AND MINIMIZES HEAT BUILD UP. PRECISION MOLDED RAW EDGE COGGED CONSTRUCTION TRANSFERS MORE POWER WITH MUCH GREATER EFFICIENCY. STABILITY IS ASSURED BY USING STOCK THAT MAINTAINS CORD INTEGRITY, ASSURING UNIFORM DISTRIBUTION OF LOAD TRANSMISSION.
-PIXBX123>
NOTCHED GRIP V-BELTS-JASAX71>
NOTCHED GRIP V-BELTS-JASAX66>
NOTCHED GRIP V-BELTS-JASAX65>
AX-105 JASON INDUSTRIAL INC.
NOTCHED GRIP V-BELTS-JASAX105>
5-GRV BANDED 5-V X-900 V-BELT-JAS5R5VX900 >
5-GRV BANDED 3-V X-530 V-BELT-JAS5R3VX530 >
4/BX-74 4-grv Banded Bx-74
4-GRV BANDED BX-74 V-BELT-GAT4/BX-74>
4-GRV BANDED 5-V X-900 V-BELT-JAS4R5VX900 >
4-GRV BANDED 3-V X-850 V-BELT-JAS4R3VX850 >
4-GRV BANDED 3-V X-800 V-BELT-JAS4R3VX800 >
4-GRV BANDED 3-V X-710 V-BELT-JAS4R3VX710 >
4-GRV BANDED 3-V X-560 V-BELT-JAS4R3VX560 >
4-GRV BANDED 3-V X-530 V-BELT-JAS4R3VX530 >
3 GROOVE BANDED 5-V X-950 V-BELT-JAS3R5VX950 >
Recently Viewed
Dodge® 131434 215 Normal Duty Pillow Block Ball Bearing Unit, 2-15/16 in Dia Bore, 8-1/2 to 9-1/2 in L Bolt Center-to-Center, 3.31 in Base to Bore Centerline, 11-3/4 in OAL x 6.56 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
2-AK-25X7/8 2-grv Finished Bore Cast Iron Sheave With 7/8" Bore, Uses 3l Or A
2-GRV FINISHED BORE CAST IRON SHEAVE WITH 7/8" BORE, USES 3L OR A BELT-BRW2AK25X7/8 >
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
1-7/16" -ID H-STYLE BUSHING-BRWH17/16 >
HCI Preferred Supplier 26038 Union Hydraulic Tee, 1/2 in Nominal, 37 deg JIC Flared End Style, Steel
HCI Preferred Supplier 26038 Union Hydraulic Tee, 1/2 in Nominal, 37 deg JIC Flared End Style, Steel
Proto® TorquePlus™ J1238-T500 1-Piece Standard Straight Wrench, 1-3/16 in Wrench, 12 Points, 15 deg Offset, 15-7/8 in OAL, Alloy Steel, Polished Chrome, ASME B107.100-2010/AS4984A/AS954G
