V-BELTS COGGED 3VX-5VX-8VX
5-VX-600 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELT 60."-JAS5VX600 >
5-VX-610 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BETLS-JAS5VX610>
5-VX-630 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELTS-JAS5VX630>
5-VX-650 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELT 65.'-JAS5VX650 >
5-VX-660 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELT 66."-JAS5VX660 >
5-VX-670 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELT 67."-JAS5VX670 >
5-VX-680 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELTS-JAS5VX680>
5-VX-690 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELTS-JAS5VX690>
5-VX-710 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELT 71."-JAS5VX710 >
5-VX-730 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELTS-JAS5VX730>
5-VX-740 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELT 74.'-JAS5VX740 >
Recently Viewed
RIDGID® 31365 5 Series Strap Wrench, 5 in Pipe, 12 in OD Tubing
Browning 16-TOOTH #60-1 CHAIN SPROCKETS BRW H-6016 X 1-15/16
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
AX-105 JASON INDUSTRIAL INC.
NOTCHED GRIP V-BELTS-JASAX105>
GEARWRENCH® 9060D Jumbo Open End Regular Length Combination Wrench, 1-5/16 in Wrench, 12 Points, 0/15 deg Offset, 18.11 in OAL, High Alloy Steel, Polished Chrome
GEARWRENCH Original ratcheting wrenches combine the speed of a ratchet with the access and control of a wrench. They offer the ease of 5 degrees of movement to turn fasteners, versus 30 degrees on standard combination wrenches. The small ratcheting box end head design enables access to tight spots where a ratchet won't fit. The open end allows for easier access on tough to reach spots, making jobs go faster and easier. This set is a great addition to any mechanic tools collection.
40-AMP 2-POLE GE CIRCUIT BREAKERS-GEHTHQL2140>
PTI 10B-31B Single Strand Hub Type B Roller Chain Sprocket, 20 mm Dia Bore, 163.9 mm OD, #10B-1 Chain, 31 Teeth, 15.875 mm Pitch, C45 Steel
Hub type metric sprockets are available with a minimum plain bore (pilot bore) and some stock finished bore sizes. Any shaft size is possible with our custom bore and keyway capability. Sprockets with hubs are typically fitted to the shaft as a clearance fit. They are held in place with two set screws and a keyway. Clearance fits are popular for light loads and slow speeds. A press fit (or shrink fit to the shaft) is usually preferred for higher speeds or heavier loads as they fit to the shaft more securely than a clearance fit sprocket. Depending on the clearance of the shaft fit, sprockets may work slightly on the shaft causing possible fretting or shaft wear. All sprockets are available with hardened teeth from stock or on request. Press fits usually require the sprocket to be heated for installation to expand the bore. As a heated sprocket cools, it shrinks, conforming to the shaft with a tight grip. A set screw can be used to secure the key. The TL taper bushed sprocket will function like the press fit sprocket and is generally easier to install.
