V-BELTS BANDED A-B-C-D
JASON 2RB100 BANDED V-BELT, 12" LENGTH X 1" WIDE
2 RUBBER V-BELT, 21/32" TOP WIDTH, 7/16" DEPTH, 103" OUTSIDE LENGTH; SECTION B. OIL AND HEAT RESISTANT MADE OF NATURAL RUBBER/SBR-
JAS2RB100 >
JASON 3RB124 6-GRV BANDED V-100 V-BELTS, TOP WIDTH .066" 21/32" 3 RIBS 127" OUTSIDE LENGTH
V-BELT, OIL AND HEAT RESISTANT, STATIC DISSIPATING, 127 " OUTSIDE LENGTH, 21/32 " BELT WIDTH, 1 BAND. POLYESTER TENSILE MATERIAL, RUBBER OUTER MATERIAL
-JAS3RB124 >
C-270/06 PIX BELTS Classic Banded V-Belt
6-GRV BANDED C-270 V-BELTS-PIXC270/06>
C-210/12 PIX BELTS
12 GROOVE BANDED C-210 V-BELT OUTSIDE CIRCUMFERENCE 214"-PIXC210/12 >
Recently Viewed
Touch 'n Tone Spray Paint provides a versatile, multi-purpose paint for home, hobby or craft use. Convenient spray application helps complete projects quickly and easily. Available in a wide variety of colors and finishes to provide endless decorating options!
1/2" -ID JAW COUPLING HALVES
1-QUART DO-IT-BEST 10-W-40 MOTOR OIL - JWH579335>
Browning® 1073832 Type F Q-D® Bushing, 2-3/16 in Dia Bore, 4-3/8 in Dia Barrel, 6-5/8 in Dia Flange, 3.68 in OAL
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Armstrong® 25-110 Open End Regular Length Combination Wrench, 5/16 in, 12 Points, 15 deg Offset, 4.36 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-110 Open End Regular Length Combination Wrench, 5/16 in, 12 Points, 15 deg Offset, 4.36 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Browning 15-TOOTH #40-1 CHAIN SPROCKETS BRW H-4015 X 1.3/16
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
