V-BELTS BANDED A-B-C-D
B-87/10 PIX BELTS eavy-duty, 10-banded classical wrapped V-belt manufactured by PIX. This type of belt ties 10 individual "B" section V-belts side-by-side into a single unified band to eliminate belt whip, twisting, or turnover on heavy industrial machine
10-GRV BANDED B-87 V-BELTS-PIXB87/10>
B-85/10 PIX BELTS banded B-section V-belt featuring a 10-rib/10-groove banded configuration with an 85-inch inside length
10-GRV BANDED B85 V-BELT-PIXB85/10>
B-83/03 PIX BELTS 3-rib/3-banded classical B-section V-belt designed for industrial and heavy-duty mechanical
3-GRV BANDED B-83 V-BELTS-PIXB83/03>
B-80/10 PIX BELTS 10-rib banded classical B-section V-belt with an outside circumference of 83 inches (approx. 2.03 meters)
10-GROOVE BANDED B-80 V-BELT-PIXB80/10>
B-77/06 PIX BELTS classical B-section banded V-belt
6-GRV BANDED B-77 V-BELTS-PIXB77/06>
B-75/12 PIX BELTS
12 GROOVE BANDED B-75 V-BELT OUTSIDE CIRCUMFERENCE 78-PIXB75/12 >
B-75/10 PIX BELTS
10-GRV BANDED B-75 V-BELT OUTSIDE CIRCUMFERENCE 78-PIXB75/10 >
B-73/06 PIX BELTS
6-GRV BANDED B-73 V-BELTOUTSIDE CIRCUMFERENCE 76-PIXB73/06 >
B-73/05 PIX BELTS
5-GRV BANDED B-73 V-BELTOUTSIDE CIRCUMFERENCE 76-PIXB73/05 >
B-73/04 PIX BELTS
4-GRV BANDED B-73 V-BELTOUTSIDE CIRCUMFERENCE 76-PIXB73/04 >
Recently Viewed
1" X 1/4" GALVANIZED BUSHING
Browning® 1022193 MVP® Type 15 Web Companion Sheave, 1-3/8 to 3-5/8 in Bushed Bore, 10.4 in OD, 5 Grooves, 10.4 in Dia Pitch, 7-7/8 in W Face
MVP® sheaves are a series of angular faced center flanges which are bolted to the fixed flange mounted on the barrel. They also contain another series of angular faced flanges which are bolted to the end flange and threaded locking collar. When the threaded locking collar is turned clockwise, it moves the angular flanges closer together increasing the pitch diameter. When the collar is moved counterclockwise, the flanges are moved apart, decreasing the pitch diameter. The pitch diameter is infinite. This means the collar adjustment can be turned and stopped at any time regardless of location between the minimum and the maximum setting. When the desired diameter is obtained, the locking collar is locked by tightening screws. In contrast VL, VP, and VM sheaves are limited by half- turn or 180 deg adjustment points.
BBI 538088 Partially Threaded Socket Cap Screw, M6x1, 40 mm OAL, Stainless Steel, A2-70 Grade
BBI 538088 Partially Threaded Socket Cap Screw, M6x1, 40 mm OAL, Stainless Steel, A2-70 Grade
Browning 16-TOOTH #50-1 CHAIN SPROCKETS BRW H-5016 X 1-1/4
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
MORSE® 11408 1330 General Purpose Jobber Length Drill Bit, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
2-1/2" -MALE PIPE THREADX2" -FEMALE PIPE THREAD GALVANIZED BUSHING-FIT21/2X2GB >
