V-BELTS A-B-C-D-E
PIX A-31 IS A CLASSICAL V-BELT 33" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA31 >
PIX A-32 IS A CLASSICAL V-BELT 34" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
PIXA32 >
PIX A-33 IS A CLASSICAL V-BELT 35" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA33 >
PIX A-34 IS A CLASSICAL V-BELT 36" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA34 >
PIX A-35 IS A CLASSICAL V-BELT 37" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA35 >
PIX A-36 IS A CLASSICAL V-BELT 38" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA36 >
PIX A-37 IS A CLASSICAL V-BELT 39" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA37 >
PIX A-38 IS A CLASSICAL V-BELT 40" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA38 >
PIX A-39 IS A CLASSICAL V-BELT 41" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA39 >
PIX A-40 IS A CLASSICAL V-BELT 42" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA40 >
PIX A-41 IS A CLASSICAL V-BELT 43" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA41 >
PIX A-42 IS A CLASSICAL V-BELT 44" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA42 >
PIX A-44 IS A CLASSICAL V-BELT 46" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA44 >
PIX A-45 IS A CLASSICAL V-BELT 47" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA45 >
PIX A-46 IS A CLASSICAL V-BELT 48" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA46 >
PIX A-47 IS A CLASSICAL V-BELT 49" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA47 >
PIX A-48 IS A CLASSICAL V-BELT 50" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
PIXA48 >
PIX A-50 IS A CLASSICAL V-BELT 52" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA50 >
PIX A-53 IS A CLASSICAL V-BELT 55" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA53 >
PIX A-56 IS A CLASSICAL V-BELT 58" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA56 >
PIX A-57 IS A CLASSICAL V-BELT 59" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA57 >
PIX A-66 IS A CLASSICAL V-BELT 68" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA66 >
PIX A-67 IS A CLASSICAL V-BELT 69" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA67 >
PIX A-69 IS A CLASSICAL V-BELT 71" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA69 >
Recently Viewed
Browning 12-TOOTH #80-1 CHAIN SPROCKETS BRW H-8012 X 1-1/4
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
4 X 3 BLACK BUTT WELD REDUCER - FIT4X3BWR >
#12 X 1-1/4" Woodgrip Screws
14-MM-ID 1210-STYLE TAPER-LOCK BUSHING - IDC121014MM>
FERNCO 3" TO 3" CAST TO PVC DONUT-JWH429628>
BUGLE HEAD COARSE THREAD. FOR ATTACHING GYPSUM BOARD TO WOOD STUDS. NO. 2 REDUCED PHILLIPS RECESS. THIS SCREW IS CONSTRUCTED OF HARDENED STEEL WHICH IS THE RESULT OF CARBON STEEL BEING PUT THROUGH HEAT TREATMENT, QUENCHING, AND FURTHER REHEATING MAKING IT EXTREMELY DURABLE. HARDENED STEEL IS MORE RESISTANT TO WEAR, CORROSION, AND ABRASION.
-JWH701416 >
