V-BELTS A-B-C-D-E

V-BELTOUTSIDE CIRCUMFERENCE 107"-JASA105 >

V-BELTS-BRWA105>

V-BELTS-BRWA103>

V-BELT OUTSIDE CIRCUMFERENCE 103-PIXA101 >

Neoprene wrapped construction for durability and smooth operation
Up to 95% efficiency under proper operating conditions
Approximate outside length: 102 inches
Standard A-section dimensions (1/2" top width, ~5/16" thickness)
Oil, heat, and abrasion resistant materials

6-GROOVE BANDED 5-V-2800 V-BELT - PIX5V280011 >

6-GROOVE BANDED 5-V-2800 V-BELT - PIX5V280010 >

6-GROOVE BANDED 5-V-2800 V-BELT - PIX5V280009 >

6-GROOVE BANDED 5-V-2800 V-BELT - PIX5V280007 >

6-GROOVE BANDED 5-V-2800 V-BELT - PIX5V280006 >

6-GROOVE BANDED 5-V-2800 V-BELT - PIX5V280005 >

6-GROOVE BANDED 5-V-2800 V-BELT - PIX5V280004 >

6-GROOVE BANDED 5-V-2800 V-BELT - PIX5V280003 >

6-GROOVE BANDED 5-V-2800 V-BELT - PIX5V280002 >

6-GROOVE BANDED 5-V-2800 V-BELT - PIX5V2800 >

FHP V-BELT -JAS5L480 >

FHP V-BELT -GAT3480 >

2-1/8" TOP WIDTH V/SPEED BELTS-PIX3432V480>

V-BELTS-DAY2RBP53>

OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA98K>

OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA94K>

OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA83K>

OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA81K>

OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES . IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA73K>