TIMING BELTS
5-MM-PITCHX700-MM TIMING BELT-GAT5MR70025 >
5-MM-PITCH X 750-MM TIMING BELT - GAT5MR75009>
5-MM-PITCH X 850-MM TIMING BELT - GAT5MR85015>
5-MM-PITCH X 900-MM TIMING BELT - GAT5MR90025>
5-GRV BANDED 8-V-1320 V-BELT-GAT5/8V1320 >
XL-PITCH X 5" TIMING BELTS-DAY50XL037>
5-MM-PITCH X 500-MM TIMING BELTS-DAY5005M25>
5-MM-PITCHX500-MM TIMING BELT-JAS5005M15 >
JAS500H100>
JAS5013M06>
JAS5013M09>
JAS5013M15>
JAS5013M25>
JAS5013M44>
5-MM-PITCH X 505-MM TIMING BELT - JAS5055M15>
JAS507XH150>
JAS507XH200>
XH-PITCH X 50.7" TIMING BELTS-BRW507XH200>
JAS507XH300>
XH-PITCH X 50.7" TIMING BELTS-BRW507XH300>
JAS507XH400>
JAS507XH100>
H-PITCH X 51" TIMING BELTS-BRW510H075>
H-PITCH X 51" TIMING BELT - BRW510H100>
Recently Viewed
Browning 20-TOOTH #50-1 CHAIN SPROCKETS BRW H-5020 X 1-3/8
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
20 TOOTH SPROCKETS FOR #60 CHAIN
KEVLAR V-BELTS-PIXB389K>
1-VP-40X7/8 Single Groove Variable Pitch Sheavess 40x7/8
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 degree increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called "Number Of Turns Open From Closed Position"
VP single and double groove sheaves, designed for heavier duty service up to 25 hp.
1 Groove, Finished Bore, Variable Pitch, Cast Iron Sheave, for 3L, 4L or A, 5L or B Section Belt
Type of Bore - Finished
Bore (In) - 7/8
Length Thru Bore - 1 7/8
1.5" X 1.5" X 1/16" X 72 ALUMINUM ANGLE-M-D58289 >
Porter-Cable® 43002 Router Collet, 1/4 in Collet, For Use With 4Z953, 6A706 Laminate Trimmers
