TIMING BELTS
L-PITCH X 36.7" TIMING BELTS-BRW367L075>
L-PITCHX36.7" TIMING BELT-JAS367L100 >
L-PITCH X 36.7" TIMING BELTS-BRW367L100>
L-PITCH X 36.7" TIMING BELTS-DAY367L100>
FHP V-BELT (5-L-690)OUTSIDE CIRCUMFERENCE 69."-GAT3690 >
H-PITCHX37" TIMING BELT-JAS370H100 >
H-PITCHX37" TIMING BELT-JAS370H150 >
FHP V-BELT (5-L-740)OUTSIDE CIRCUMFERENCE 74."-GAT3740 >
5-MM-PITCHX375-MM TIMING BELT-JAS3755M10 >
5-MM-PITCHX375-MM TIMING BELT-JAS3755M20 >
JAS3755M25>
5-MM-PITCHX375-MM TIMING BELT-JAS3755M32 >
H-PITCHX37.5" TIMING BELT-JAS375H150 >
L-PITCHX37.5" TIMING BELT-JAS375L050 >
L-PITCHX37.5" TIMING BELT-JAS375L100 >
L-PITCHX37.5" TIMING BELT-JAS375L125 >
L-PITCHX37.5" TIMING BELT-JAS375L150 >
L-PITCHX37.5" TIMING BELT-JAS375L200 >
L-PITCHX37.5" TIMING BELT-JAS375L300 >
OPTIBELT SUPER VX VARIABLE SPEED-SCI37X10X900 >
3-MM-PITCHX384-MM TIMING BELT-JAS3843M05 >
3-MM-PITCHX384-MM TIMING BELT-JAS3843M12 >
3-MM-PITCHX384-MM TIMING BELT-JAS3843M50 >
FHP V-BELT (5-L-840) OUTSIDE CIRCUMFERENCE 84."-GAT3840 >
Recently Viewed
5/5-VX-710 5-groove Banded 5-vx-710 V-belt
5-GROOVE BANDED 5-VX-710 V-BELT - GAT5/5VX710>
19 TOOTH SPROCKETS FOR #50 CHAIN-BRWH5019X1.3/16 >
OIL SEALS-1.375" X 2.502".250"-IMS13862>
30 TOOTH SPROCKETS FOR #40 CHAIN-BRWH4030X1.3/16 >
Bore Size: 2-inch inner diameter designed for shaft mounting. Housing Material: Sturdy cast iron construction featuring a non-expansion design. Bearing Material: High-quality Babbitt metal optimized for continuous operations up to an ambient temperature of 130°F.Physical Dimensions: Features a 7-1/2" overall length (OAL) and a 1-3/4" base-to-center height. Lubrication Layout: Tapped housing to receive standard grease cups or high-pressure style fittings, complete with broached grease grooves. Installation Ease: Built with slotted mounting holes to allow trouble-free alignment and adjustment on structural bases.
The Crescent Nicholson rectangular double/single-cut handy files with American pattern are great for shaping, finishing, and sharpening. The single-cut grade on one side allow you to sharpen and smooth metal surfaces, while the double-cut on the reverse side can be used for general filing and rapid stock removal. File's length is measured exclusive of the handle.
