TIMING BELTS
FHP V-BELT (3-L-610) OUTSIDE CIRCUMFERENCE61."-GAT1610 >
8-MM-PITCH X 1600-MM TIMING BELTS-AMT1600S8M20>
8-MM-PITCHX1600-MM TIMING BELT-JAS16008M62 >
8-MM-PITCHX1600-MM TIMING BELT-JAS16008M50 >
8-MM-PITCHX1600-MM TIMING BELT-JAS16008M40 >
8-MM-PITCHX1600-MM TIMING BELT-JAS16008M35 >
8-MM-PITCHX1600-MM TIMING BELT-JAS16008M30 >
8-MM-PITCHX1600-MM TIMING BELT-JAS16008M20 >
FHP V-BELT (3-L-600) OUTSIDE CIRCUMFERENCE 60."-GAT1600 >
X L-PITCHX16" TIMING BELT-JAS160XL100 >
X L-PITCHX16" TIMING BELT-JAS160XL037 >
XL-PITCH X 16" TIMING BELTS-BRW160XL037>
XL-PITCH X 16" TIMING BELTS-BRW160XL025>
X L-PITCHX16" TIMING BELT-JAS160XL025 >
5-MM-PITCHX400-MM TIMING BELT-JAS16T5400 >
5-MM-PITCHX300-MM TIMING BELT-JAS16T5300 >
5-MM-PITCHX295-MM TIMING BELT-JAS16T5295 >
10-MM-PITCH X 500-MM TIMING BELT - JAS16T10/500 >
5-MM-PITCHX720-MM UR TIMING BELT-JAS16AT5/720 >
10-MM-PITCH X 780-MM TIMING BELT - JAS16AT10/780>
10-MM-PITCHX660-MM TIMING BELT-JAS16AT10/660 >
FHP V-BELT (3-L-550) OUTSIDE CIRCUMFERENCE 55."-GAT1550 >
XH-PITCH X 154" TIMING BELTS-BRW1540XH200>
FHP V-BELT (3-L-510) OUTSIDE CIRCUMFERENCE 51."-GAT1510 >
Recently Viewed
PIX 4-L-170 WRAPPED CONSTRUCTION V-BELT, 17" OC; A/4L SECTION, 1/2" WIDTH
DURABLE AND HEAVY DUTY PERFORMANCE, OIL, HEAT AND TEMPERATURE RESISTANT. ANTI-STATIC AND FLEXIBLE DESIGN, POLYESTER CORD REINFORCED STRENGTH, WIDE APPLICATION RANGE
-PIX4L170>
" L" JAW TYPE COUPLING WITH 1/8" BORES-BRWL035X1/8 >
" L" JAW TYPE COUPLING WITH 5/16" BORES-BRWL035X5/16 >
1/2" -ID JAW COUPLING HALVES-BRWL050X1/2 >
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING. -PIXB89K>
PIX A-97 IS A CLASSICAL V-BELT 99" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA97 >
