SPHERICAL ROLLER BEARINGS
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22226 >
TPR-ID SPHERICAL ROLLER BEARING-NTN22226K >
TPR-ID SPHERICAL ROLLER BEARING-GUL22226K >
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22228 >
TPR-ID SPHERICAL ROLLER BEARINGS-FAG22228K>
TPR-ID SPHERICAL ROLLER BEARING-GUL22228K >
STR-ID SPHERICAL ROLLER BEARINGS-FAG22230>
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22230 >
TPR-ID SPHERICAL ROLLER BEARING-GUL22230K >
TPR-ID SPHERICAL ROLLER BEARINGS-SNR22230K>
TPR-ID SPHERICAL ROLLER BEARINGS
TPR-ID SPHERICAL ROLLER BEARING-GUL22232K >
TPR-ID SPHERICAL ROLLER BEARINGS - NTN2232K
STR-ID SPHERICAL ROLLER BEARING
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22234 >
TPR-ID SPHERICAL ROLLER BEARING-NTN22234K >
TPR-ID SPHERICAL ROLLER BEARING-GUL22234K >
STR-ID SPHERICAL ROLLER BEARINGS
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22236 >
TPR-ID SPHERICAL ROLLER BEARING-GUL22236K >
Bore Diameter: 40 mm (1.57 inches) Outside Diameter: 90 mm (3.54 inches) Width: 33 mm (1.3 inches) Weight: Approximately 1.0 kg (2.27 lbs)Maximum RPM: Up to 8,000 RPM
STRAIGHT-ID SPHERICAL ROLLER BEARING-NTN22308 >
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22308 >
Spherical roller bearing with relubrication features
Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts.
Accommodate misalignment
High load carrying capacity
Relubrication features
Low friction and long service life
Increased wear resistance
Recently Viewed
47-MM SEALED CAM FOLLOWERS-MCGMCF47S>
H-PITCHX58.5" TIMING BELT-JAS585H150 >
13 TOOTH SPROCKETS FOR #40 CHAIN-BRWH4013X1/2 >
Enerpac® RCH1003 Hollow Plunger Single Acting Spring Return Hydraulic Cylinder, 103.1 ton Advance Capacity, 6-1/2 in Bore, 3 in L Stroke, 10 in Retract, 4.97 in Dia Rod, 10000 psi Pressure
Enerpac® RCH1003 Hollow Plunger Single Acting Spring Return Hydraulic Cylinder, 103.1 ton Advance Capacity, 6-1/2 in Bore, 3 in L Stroke, 10 in Retract, 4.97 in Dia Rod, 10000 psi Pressure
Gates® Power Transmission Hi-Power® II B39 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 42 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Ideal for construction, municipalities, shipyards, agriculture chemical spraying and industrial plant maintenance.
