BALL BEARINGS
6203-3/4-2-Z 3/4" -ID 6203 Ball Bearing
3/4" -ID 6203 BALL BEARING-GUL62033/42Z >
6203-5/8-2-RS 5/8" -ID 6203 Ball Bearing
5/8" -ID 6203 BALL BEARING-GUL62035/82RS >
6203-5/8-2-Z 5/8" -ID 6203 Ball Bearing
5/8" -ID 6203 BALL BEARING-GUL62035/82Z >
6203-LL-NR Double Sealed Ball Bearing With
DOUBLE SEALED BALL BEARING WITH SNAP RING-NTN6203LLNR >
6204-2-NSL Double Sealed Radial Ball Bearings
DOUBLE SHIELDED BALL BEARINGS WSR
6204-2-RS-NR Double Sealed Ball Bearing With Snap RIng
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL62042RSNR >
6204-2-Z Double Shielded Bearing
Bore Diameter (ID): 20 mm Outer Diameter (OD): 47 mm Width: 14 mm Closure Type: Double metal shields (2Z) Dynamic Load Rating: 13.5 kN Static Load Rating: 6.55 kN Key Features
6204-3/4-2-RS 3/4"-ID 6204 Ball Bearing
3/4"-ID 6204 BALL BEARING - GUL62043/42RS >
6204-EE SNR Bearing 20-MM Double sealed Ball Bearing
DOUBLE SEALED BALL BEARINGS
6204-JEM Double Open Face Bearing
Deep groove ball bearing
Single row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance
6204-LL-NR Double Sealed Ball Bearing With
DOUBLE SEALED BALL BEARING WITH SNAP RING-NTN6204LLNR >
6204-NR-EE Double Sealed Ball Bearings
DOUBLE SEALED BALL BEARINGS WSP-SNR6204NREE>
Recently Viewed
Drillco 700A015 Jobber Length Drill Bit, #15 Drill - Wire, 0.073 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Uncoated
700 series solid carbide drills retain hardness and sharp edges at high temperature. Their abrasion-resistant qualities make them advantageous for drilling abrasive materials. They offer the advantage of extreme rigidity for greater drilling accuracy.
Browning® 1032259 AK Series Type 2 FHP Sheave, 1 in Finished Bore, 3.95 in OD, 2 Grooves, 3.9 in (A)/3.36 in (3L) Dia Pitch, 1-3/8 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Gates® Power Transmission PowerGrip® HTD® P50-5M-15AL Sprocket, 3/8 to 1-3/16 in Rough Stock Bore, 3.088 in OD, 50 Grooves, 3.133 in Dia Pitch, 0.781 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
DOUBLE OPEN FACE BALL BEARINGS-FAF309W>
2-GRV A-BELT H-BUSH SHEAVES
1-8/10-AMP 600-VOLT FUSES-LITFLSR18/10 >
