BALL BEARINGS

BALL BEARINGS -GEN870288 >

BALL BEARING-GUL87016 >

WIDE INNER RACE BALL BEARINGS -GUL87008 >

SPECIAL L/MOWER BALL BEARINGS-GEN850488>

BALL BEARING-NDH77601>

BALL BEARINGS-NDH77505>

DOUBLE SEALED BALL BEARINGS-GEN77036>

R Light Inch Series Ball Bearing
Item #102072506
Single Row Radial Bearing
1/2" ID x 1 1/8" OD x 5/16" Wide
Double Shielded
No Snap Ring
Standard (ABEC 1)

DOUBLE SHIELDED MINI BALL BEARING-GEN77R16>

DOUBLE SHIELDED MINI BALL BEARING-GEN77R14>

DOUBLE SHIELDED MINI BALL BEARING-GEN77-R-10>

BALL BEARING WITH SNAP RING-GUL7620DLG >

BALL BEARING WITH SNAP RING-GUL7616DLG >

BALL BEARING WITH SNAP RING-GUL7612DLG >

BALL BEARING WITH SNAP RING-GUL7520DLG >

BALL BEARING WITH SNAP RING-GUL7516DLG >

BALL BEARING WITH SNAP RING-GUL7512DLG >

BALL BEARINGS WSR -GUL7510DLG >

Bore Diameter (Inner): 45 mm Outside Diameter: 120 mm Overall Width: 29 mm Contact Angle: 40° (Optimized for managing large, single-direction axial forces)Cage Material: Machined Solid Brass (Indicated by the "M" suffix, offering excellent wear resistance under rapid acceleration)Basic Dynamic Load Rating: 85.2 kN Basic Static Load Rating: 55 kN Limiting/Reference Speed: 7,500 RPM Sealing Configuration: Open type (Requires external lubrication, often factory paired with MT47 grease or run open in oil-bath setups)

The SKF 7315BY (frequently referenced via superseding or equivalent modern designations like SKF 7315 BECBY) is a single-row angular contact ball bearing featuring a 40-degree contact angle and a machined brass cage. It is designed to handle combined radial and heavy unilateral axial loads in industrial machinery.

Bore Diameter: 75 mm (2.953 in) Outer Diameter: 160 mm (6.299 in) Width: 37 mm (1.457 in) Contact Angle: 40° (denoted by the 'B' suffix) Maximum Limiting Speed: ~5,300 RPM Load Capacities: Dynamic load rating around 132 kN; static load rating around 104 kN

THRUST BALL BEARING-SNR7314BGA>

THRUST BALL BEARING-NTN7312BL1G >

THRUST BALL BEARINGS-SNR7311BGA>